View the manual for the Fujitsu TFM Module f/FBU option here, for free. This manual comes under the category controllers and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Fujitsu TFM Module f/FBU option or do you need help? Ask your question here

Below you will find the product specifications and the manual specifications of the Fujitsu TFM Module f/FBU option.
| Brand | Fujitsu |
| Model | TFM Module f/FBU option | S26361-F3669-L100 |
| Product | controller |
| EAN | 4051554398217, 4053162300125, 5053866578300 |
| Language | English |
| Filetype | User manual (PDF) |
| PCI Express slots version | 2.0 |
| Host interface | PCI Express |
| Supported storage drive interfaces | Serial ATA |
| RAID levels | 0, 1,5, 6 |
| SSD support | Yes |
| Data transfer rate | 6 Gbit/s |
| Internal memory | 1000 MB |
| Memory clock speed | 1333 MHz |
| Compatible products | D3116 |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fujitsu TFM Module f/FBU option below.
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
Yes, the Fujitsu TFM Module f/FBU option supports SSDs, allowing for faster data transfer rates and improved performance for the user compared to traditional HDDs.
The data transfer rate of the Fujitsu TFM Module f/FBU option is 6 Gbit/s, which is quite high and ensures quick access to and retrieval of data for the user.
The Fujitsu TFM Module f/FBU option supports RAID levels 0, 1, 5, and 6, providing users with a range of options for data redundancy and performance optimization.
The Fujitsu TFM Module f/FBU option has 1000 MB of internal memory, which is sufficient for handling storage operations effectively and efficiently.
The host interface of the Fujitsu TFM Module f/FBU option is PCI Express, which is a commonly used and reliable interface for connecting the module to the motherboard and other components in the system.
To mount the FBU inside the chassis during installation of the Fujitsu TFM Module f/FBU option controller, follow these steps: 1. Fit the FBU under both retaining brackets of the FBU holder at a slight angle. 2. Push the FBU in until it locks in place. 3. Connect the cable end of the FBU cable to the FBU adapter cable. 4. Secure the FBU to the server chassis according to the server documentation. 5. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. These steps ensure proper installation of the FBU within the chassis.
To connect the Fujitsu TFM Module f/FBU option to the RAID controller using the supplied cables, follow these steps: 1. Connect the cable end of the FBU cable to the FBU adapter cable. 2. Secure the FBU to the server chassis according to the server documentation. 3. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. Ensure proper connection as shown in the manual for seamless integration.
Yes, the manual of the Fujitsu TFM Module f/FBU option is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Fujitsu and is the answer not in the manual?
Question and answer
Number of questions: 0