Fujitsu TFM Module f/FBU option manual

Fujitsu TFM Module f/FBU option
9 · 1
PDF manual
 · 116 pages
English
manualFujitsu TFM Module f/FBU option
Modular RAID Controllers
71
Modular RAID 6Gb/s (SAS2.0)

4.6.1 Features

Flexibility for both SAS 2.0 and SATA II / SATA III
Advanced management and configuration suites

12V PCIe RAID HDD module

Supports RAID levels 0, 1, 1E, 10
Offers advanced MegaRAID functionality to integrated LSI SAS
8-lane 5.0 / 8.0 Gbit PCIe host bus
6 SAS/SATA ports, (2+2 ports for Storage Blade Connection and 2 ports for
Blade internal HDD Connection)
Each SAS/SATA port supports SSP and STP
Support for the following STP features:
Addressing of SATA targets through expander
Native Command Queuing (NCQ)
Support of the following SSP features:
Wide port functionality (2x2 Phys from a single quad port)
Narrow port functionality (1 Phy)
Compatible with SATA target devices
SGPIO interfaces for signaling of SAS/SATA ports
Drive spin-up sequencing control
Hot-plug drives
1.5 Gbit/s, 3.0 Gbit/s and 6.0 Gbit/s link rates for both SAS an SATA

4.6.2 Controller versions

Name Chip PCIe No. of SAS channels
S26361-D2837-Ax LSI SAS2208 PCIe 2.0
2 ports for Blade internal
HDD Connection
S26361-D2837-Cx LSI SAS2208 PCIe 3.0
2 ports for Blade internal
HDD Connection

Manual

View the manual for the Fujitsu TFM Module f/FBU option here, for free. This manual comes under the category controllers and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Fujitsu TFM Module f/FBU option or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Fujitsu and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Fujitsu TFM Module f/FBU option specifications

Below you will find the product specifications and the manual specifications of the Fujitsu TFM Module f/FBU option.

General
BrandFujitsu
ModelTFM Module f/FBU option | S26361-F3669-L100
Productcontroller
EAN4051554398217, 4053162300125, 5053866578300
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
PCI Express slots version2.0
Host interfacePCI Express
Supported storage drive interfacesSerial ATA
Performance
RAID levels0, 1,5, 6
SSD supportYes
Data transfer rate6 Gbit/s
Internal memory1000 MB
Memory clock speed1333 MHz
Compatible productsD3116
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fujitsu TFM Module f/FBU option below.

A battery in my controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

Does the Fujitsu TFM Module f/FBU option support SSDs?

Yes, the Fujitsu TFM Module f/FBU option supports SSDs, allowing for faster data transfer rates and improved performance for the user compared to traditional HDDs.

What is the data transfer rate of the Fujitsu TFM Module f/FBU option?

The data transfer rate of the Fujitsu TFM Module f/FBU option is 6 Gbit/s, which is quite high and ensures quick access to and retrieval of data for the user.

What types of RAID levels are supported by the Fujitsu TFM Module f/FBU option?

The Fujitsu TFM Module f/FBU option supports RAID levels 0, 1, 5, and 6, providing users with a range of options for data redundancy and performance optimization.

How much internal memory does the Fujitsu TFM Module f/FBU option have?

The Fujitsu TFM Module f/FBU option has 1000 MB of internal memory, which is sufficient for handling storage operations effectively and efficiently.

What is the host interface of the Fujitsu TFM Module f/FBU option?

The host interface of the Fujitsu TFM Module f/FBU option is PCI Express, which is a commonly used and reliable interface for connecting the module to the motherboard and other components in the system.

How should the FBU be mounted inside the chassis during installation?

To mount the FBU inside the chassis during installation of the Fujitsu TFM Module f/FBU option controller, follow these steps: 1. Fit the FBU under both retaining brackets of the FBU holder at a slight angle. 2. Push the FBU in until it locks in place. 3. Connect the cable end of the FBU cable to the FBU adapter cable. 4. Secure the FBU to the server chassis according to the server documentation. 5. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. These steps ensure proper installation of the FBU within the chassis.

What steps are involved in connecting the FBU to the TFM on the RAID controller using the supplied cables?

To connect the Fujitsu TFM Module f/FBU option to the RAID controller using the supplied cables, follow these steps: 1. Connect the cable end of the FBU cable to the FBU adapter cable. 2. Secure the FBU to the server chassis according to the server documentation. 3. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. Ensure proper connection as shown in the manual for seamless integration.

Is the manual of the Fujitsu TFM Module f/FBU option available in English?

Yes, the manual of the Fujitsu TFM Module f/FBU option is available in English .

Is your question not listed? Ask your question here

No results