Fujitsu TFM Module f/FBU option manual

Fujitsu TFM Module f/FBU option
9 · 1
PDF manual
 · 116 pages
English
manualFujitsu TFM Module f/FBU option
68
Modular RAID Controllers
Modular RAID 6Gb/s (SAS2.0)

4.5.5 Installing an optional FBU

4.5.5.1 Features
Using the LSI MegaRAID® CacheVault™ Technology offers better protection
for controller cache with our eco-friendly, low-maintenance 6Gb/s LSI
MegaRAID based controllers featuring CacheVault Technology.
This technology offloads data stored in the LSI MegaRAID based controller
cache to the NAND flash in the event of a power failure or other system
occurrence where the contents of controller cache are most at risk.
In addition, CacheVault technology eliminates the need for lithium ion (Li-ion)
batteries, traditionally used to protect DRAM cache memory on PCI RAID
controllers.
CacheVault technology offers:
CacheVault technology transfers the contents of the DRAM cache to NAND
flash using power from the supercap module in the event of a power or server
failure. With a traditional battery backup unit, after a limited time without
restored power, the cached data is lost. However, CacheVault technology safely
stores the contents of DRAM on NAND flash for up to three years.
4.5.5.2 Installation
The FBU supports remote connection to the Modular RAID Controller "PY SAS
RAID HDD Module (D2816)". The FBU is directly connected to the RAID
controller.

I Because server chassis vary, there is no standard mounting option that

is compatible with all the different system configurations. Refer to your
server’s Options Guide or Upgrade and Maintenance Manual for
mounting details.
To install the FBU to the RAID controller, proceed as follows:
Ê Ground yourself.
Ê Remove the FBU from its package.

Manual

View the manual for the Fujitsu TFM Module f/FBU option here, for free. This manual comes under the category controllers and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Fujitsu TFM Module f/FBU option or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Fujitsu and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Fujitsu TFM Module f/FBU option specifications

Below you will find the product specifications and the manual specifications of the Fujitsu TFM Module f/FBU option.

General
BrandFujitsu
ModelTFM Module f/FBU option | S26361-F3669-L100
Productcontroller
EAN4051554398217, 4053162300125, 5053866578300
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
PCI Express slots version2.0
Host interfacePCI Express
Supported storage drive interfacesSerial ATA
Performance
RAID levels0, 1,5, 6
SSD supportYes
Data transfer rate6 Gbit/s
Internal memory1000 MB
Memory clock speed1333 MHz
Compatible productsD3116
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fujitsu TFM Module f/FBU option below.

A battery in my controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

Does the Fujitsu TFM Module f/FBU option support SSDs?

Yes, the Fujitsu TFM Module f/FBU option supports SSDs, allowing for faster data transfer rates and improved performance for the user compared to traditional HDDs.

What is the data transfer rate of the Fujitsu TFM Module f/FBU option?

The data transfer rate of the Fujitsu TFM Module f/FBU option is 6 Gbit/s, which is quite high and ensures quick access to and retrieval of data for the user.

What types of RAID levels are supported by the Fujitsu TFM Module f/FBU option?

The Fujitsu TFM Module f/FBU option supports RAID levels 0, 1, 5, and 6, providing users with a range of options for data redundancy and performance optimization.

How much internal memory does the Fujitsu TFM Module f/FBU option have?

The Fujitsu TFM Module f/FBU option has 1000 MB of internal memory, which is sufficient for handling storage operations effectively and efficiently.

What is the host interface of the Fujitsu TFM Module f/FBU option?

The host interface of the Fujitsu TFM Module f/FBU option is PCI Express, which is a commonly used and reliable interface for connecting the module to the motherboard and other components in the system.

How should the FBU be mounted inside the chassis during installation?

To mount the FBU inside the chassis during installation of the Fujitsu TFM Module f/FBU option controller, follow these steps: 1. Fit the FBU under both retaining brackets of the FBU holder at a slight angle. 2. Push the FBU in until it locks in place. 3. Connect the cable end of the FBU cable to the FBU adapter cable. 4. Secure the FBU to the server chassis according to the server documentation. 5. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. These steps ensure proper installation of the FBU within the chassis.

What steps are involved in connecting the FBU to the TFM on the RAID controller using the supplied cables?

To connect the Fujitsu TFM Module f/FBU option to the RAID controller using the supplied cables, follow these steps: 1. Connect the cable end of the FBU cable to the FBU adapter cable. 2. Secure the FBU to the server chassis according to the server documentation. 3. Connect the loose end of the FBU adapter cable to the TFM on the RAID controller. Ensure proper connection as shown in the manual for seamless integration.

Is the manual of the Fujitsu TFM Module f/FBU option available in English?

Yes, the manual of the Fujitsu TFM Module f/FBU option is available in English .

Is your question not listed? Ask your question here

No results