Fuel Fitness FE44 manual

Fuel Fitness FE44
7.2 · 1
PDF manual
 · 22 pages
English
manualFuel Fitness FE44
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW ELLIPTICAL!
Z100 / Z300 Z500
Z700

OWNER’S MANUAL

FE44

View the manual for the Fuel Fitness FE44 here, for free. This manual comes under the category crosstrainers and has been rated by 1 people with an average of a 7.2. This manual is available in the following languages: English. Do you have a question about the Fuel Fitness FE44 or do you need help? Ask your question here

Need help?

Do you have a question about the Fuel Fitness and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 4
B
bushraApril 30, 2017

Hello. I have the fuel fe44 elliptical and i have used it only about 10-20times for 45 mins each time or so. I noticed it squeeking a lot. I hve only used it 10-20 times in the past 2 and half years! I was wondering maybe im thinking i need to lubricate it? which lubricant do i use and where and how do I lubricate it as it was installed at my house and I dont know anything about machines. please help. thanks

G
Gemma February 15, 2020

I've just plugged my fuel fitness elliptical fe44 in after not using it for a while and it is showing motor error on the screen. Do you have any advice on how I can fix this.

2 comments
J
JimJanuary 23, 2021

Same question—shows Motor error—what’s the fix—Tks

A
AndrewFebruary 15, 2021

Motor Error - how to fix it?

S
sandi jonkerAugust 23, 2021

What does it mean when the screen shows motor error just after it is turned on? Can this be fixed?

E
Eliud N GathairuJanuary 18, 2023

How do you rest the machine no power is showing up

The Fuel Fitness FE44 is a crosstrainer that offers a comprehensive cardiovascular workout. The machine is designed to provide an efficient and effective exercise experience, helping users burn calories, improve endurance, and strengthen their muscles. The FE44 features a sturdy frame constructed from high-quality materials, ensuring durability and stability during workouts. It is equipped with a magnetic resistance system that allows for smooth and quiet operation, creating a comfortable exercising environment. The machine also offers a wide range of resistance levels, allowing users to customize their workout intensity to suit their fitness goals and abilities. The crosstrainer has a user-friendly console that provides important workout feedback such as time, distance, speed, and calories burned. It also includes several pre-programmed workout options, providing variety and helping users stay motivated. The FE44 is designed with user comfort in mind. It has adjustable pedals that cater to different foot sizes and can be further adjusted to optimize user posture and prevent strain. The machine also has ergonomic handlebars that provide a comfortable grip and help users maintain proper form throughout their workout. Additionally, the crosstrainer has a compact design, making it suitable for home use with limited space. It features transport wheels, allowing for easy relocation and storage when not in use. Overall, the Fuel Fitness FE44 crosstrainer offers a versatile and convenient option for individuals looking to improve their cardiovascular fitness and overall health. Its durable construction, customizable resistance levels, and user-friendly features make it a reliable and practical exercise machine.

General
BrandFuel Fitness
ModelFE44
Productcrosstrainer
LanguageEnglish
FiletypeUser manual (PDF)

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fuel Fitness FE44 below.

How much should I exercise as an adult per week?

As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.

What is an adult's maximum heart rate?

As a rule of thumb for your maximum heart rate, you can use 220 minus your age.

How do I troubleshoot if the control panel of the Fuel Fitness FE44 crosstrainer is not responding?

To troubleshoot if the control panel of the Fuel Fitness FE44 crosstrainer is not responding, you can follow these steps: 1. Check the power supply: Ensure that the elliptical is properly connected to the external power supply. Make sure the power cord is securely plugged into a working power outlet. 2. Restart the console: If the control panel is not responding, try restarting the console. Press and hold any key on the control panel for a few seconds to power off the console. Then, press any key again to power it back on. 3. Perform a control panel reset: If restarting the console doesn't resolve the issue, you can try resetting the control panel. Look for a small reset button or a combination of keys mentioned in the manual. Press and hold the reset button or the specified key combination for a few seconds to reset the control panel. 4. Check for loose connections: Inspect the cables and connections between the control panel and the main unit. Ensure that all cables are securely plugged in and there are no loose connections. 5. Contact customer support: If the control panel still does not respond after following the above steps, it is recommended to contact Fuel Fitness customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Remember to refer to the manual for any specific instructions or diagrams related to troubleshooting the control panel of the Fuel Fitness FE44 crosstrainer.

What should I do if the Fuel Fitness FE44 crosstrainer does not power up when I turn it on?

If the Fuel Fitness FE44 crosstrainer does not power up when you turn it on, you can try the following troubleshooting steps: 1. Check the power supply: Ensure that the elliptical is properly connected to the external power supply. Make sure the power cord is securely plugged into a working power outlet. 2. Verify the console connection: Ensure that the console is securely connected to the main unit of the crosstrainer. Check for any loose cables or connections and reseat them if necessary. 3. Check the power switch: Make sure the power switch on the crosstrainer is in the "on" position. If it is already on, try turning it off and then back on again to reset the power. 4. Perform a control panel reset: If the crosstrainer still does not power up, you can try resetting the control panel. Look for a small reset button or a combination of keys mentioned in the manual. Press and hold the reset button or the specified key combination for a few seconds to reset the control panel. 5. Contact customer support: If the crosstrainer continues to have power issues after following the above steps, it is recommended to contact Fuel Fitness customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model of the Fuel Fitness FE44 crosstrainer.

How can I troubleshoot if the internal self-test of the Fuel Fitness FE44 crosstrainer fails?

To troubleshoot if the internal self-test of the Fuel Fitness FE44 crosstrainer fails, you can follow these steps: 1. Check the power supply: Ensure that the elliptical is properly connected to the external power supply. Make sure the power cord is securely plugged into a working power outlet. 2. Restart the console: If the internal self-test fails, try restarting the console. Press any key on the control panel to power off the console, and then press any key again to power it back on. 3. Perform a control panel reset: If restarting the console doesn't resolve the issue, you can try resetting the control panel. Look for a small reset button or a combination of keys mentioned in the manual. Press and hold the reset button or the specified key combination for a few seconds to reset the control panel. 4. Check for loose connections: Inspect the cables and connections between the control panel and the main unit. Ensure that all cables are securely plugged in and there are no loose connections. 5. Contact customer support: If the internal self-test continues to fail after following the above steps, it is recommended to contact Fuel Fitness customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model of the Fuel Fitness FE44 crosstrainer.

What should I do if the odometer reading is not displayed on the Fuel Fitness FE44 crosstrainer?

To troubleshoot if the odometer reading is not displayed on the Fuel Fitness FE44 crosstrainer, you can follow these steps: 1. Check the power supply: Ensure that the elliptical is properly connected to the external power supply. Make sure the power cord is securely plugged into a working power outlet. 2. Power up the console: After connecting the power supply, press any key on the control panel to power up the console. The console will perform an internal self-test, and the dot matrix display will show a software version and the message window will display the odometer reading. 3. Verify the display duration: The odometer reading is displayed for only a few seconds before the console goes to the start-up display. Make sure to observe the display during this time. 4. Contact customer support: If the odometer reading is still not displayed after following the above steps, it is recommended to contact Fuel Fitness customer support for further assistance. They will be able to provide specific troubleshooting steps or arrange for a repair if necessary. Please note that these steps are general troubleshooting suggestions and may vary depending on the specific model of the Fuel Fitness FE44 crosstrainer.

How do I troubleshoot if the operation of the Fuel Fitness FE44 crosstrainer is not smooth or not functioning properly?

To troubleshoot if the operation of the Fuel Fitness FE44 crosstrainer is not smooth or not functioning properly, you can follow these steps: 1. Check for loose hardware: Ensure that all bolts and hardware on the crosstrainer are tightened properly. Loose hardware can cause squeaks, thumps, clicking, or a rough feeling during operation. Use a larger wrench if necessary to tighten the bolts securely. 2. Clean and lubricate the rear rails and wheels: Dirt build-up on the rear rails and polyurethane wheels can also cause noise and affect the smoothness of the operation. Clean the rails and wheels with a lint-free cloth and rubbing alcohol. Stubborn build-up can be removed with a non-metallic scraper. After cleaning, apply a thin coat of lubricant on the rails using your fingers or a lint-free cloth. 3. Check the levelness of the crosstrainer: Ensure that the crosstrainer is properly leveled. Uneven surfaces can affect the smoothness of the operation. Adjust the levelers on the base of the crosstrainer if necessary. 4. Use the maintenance menu in the console software: The console has built-in maintenance/diagnostic software that allows you to access various settings and tests. To enter the maintenance menu, press and hold the Start, Stop, and Enter keys for about 5 seconds. Use the menu options to test the keys, display, and perform functions like resetting the odometer or changing display units. If the troubleshooting steps above do not resolve the issue, it is recommended to contact Fuel Fitness customer support for further assistance.

Is the manual of the Fuel Fitness FE44 available in English?

Yes, the manual of the Fuel Fitness FE44 is available in English .

Is your question not listed? Ask your question here

No results