Frigidaire FFTA1233U2 manual

Frigidaire FFTA1233U2
9 · 1
PDF manual
 · 13 pages
English
manualFrigidaire FFTA1233U2

Important Safety Instructions

WARNING

For Your Safety
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any
other appliance. Read product labels for flammability and other warnings.

WARNING

Prevent Accidents
To reduce the risk of fire, electrical shock, or injury to persons when using your air conditioner,
follow basic precautions, including the following:
Be sure the electrical service is adequate for the model you have chosen. This information
can be found on the serial plate, which is located on the side of the cabinet and behind the
grille.
If the air conditioner is to be installed in a window, you will probably want to clean both
sides of the glass first. If the window is a triple-track type with a screen panel included,
remove the screen completely before installation.
Be sure the air conditioner has been securely and correctly installed according to the
separate installation instructions provided with this manual. Save this manual and the
installation instructions for possible future use in removing or reinstalling this unit.
When handling the air conditioner, be careful to avoid cuts from sharp metal fins on front
and rear coils.
The complete electrical rating of your new room air conditioner is stated on the serial plate.
Refer to the rating when checking the electrical requirements.
Be sure the air conditioner is properly grounded. To minimize shock and fire hazards,
proper grounding is important. The power cord is equipped with a three-prong grounding
plug for protection against shock hazards.
Your air conditioner must be used in a properly grounded wall receptacle. If the wall
receptacle you intend to use is not adequately grounded or protected by a time delay fuse
or circuit breaker, have a qualified electrician install the proper receptacle.
Do not run air conditioner without outside protective cover in place. This could result in
mechanical damage within the air conditioner.
Do not use an extension cord or an adapter plug.

WARNING

Electrical Information

WARNING

Avoid fire hazard or electric shock. Do not
use an extension cord or an adaptor plug. Do
not remove any prong from the power cord.

NOTE:

The power supply cord with
this air conditioner contains a current
detection device designed to reduce the risk
of fire.
Please refer to the section ‘Operation of
Current Device’ for details.
In the event that the power supply cord is
damaged, it cannot be repaired. It must be
replaced with a cord from the product
manufacturer.
2
2009 Electrolux Home Products, Inc. All rights reserved.

NOTE:

This USE & CARE MANUAL provides specific operating instructions for your model. Use the room air conditioner only as
instructed in this USE & CARE MANUAL. These instructions are not meant to cover every possible condition and situation that
may occur. Common sense and caution must be practiced when installing, operating, and maintaining any appliance.

SAFETY PRECAUTIONS

This air conditioner contains no user-serviceable parts. Always call an authorized Electrolux servicer for repairs.
Do not insert or place fingers or objects into the air discharge area in the front of the unit.
Do not start or stop the air conditioner by unplugging the power cord or turning off the power at the electrical box.
Do not cut or damage the power cord.
If the power cord is damaged, it should only be replaced by an authorized Electrolux servicer.
In the event of a malfunction (sparks, burning smell, etc.), immediately stop the operation, disconnect the power cord, and call an authorized
Electrolux servicer.
Do not operate the air conditioner with wet hands.
Do not pull on the power cord.
Do not drink any water that is drained from the air conditioner.
DANGER! Avoid Serious Injury or Death
115V
15A
230V
15A
230V
20A
230V
30A
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong.
Grounding Prong

Manual

View the manual for the Frigidaire FFTA1233U2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Frigidaire FFTA1233U2 or do you need help? Ask your question here

Need help?

Do you have a question about the Frigidaire and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Frigidaire FFTA1233U2 specifications

Below you will find the product specifications and the manual specifications of the Frigidaire FFTA1233U2.

The Frigidaire FFTA1233U2 is an air-conditioning unit designed to cool a room efficiently. It is a window-mounted unit suitable for medium-sized rooms, capable of quickly and effectively cooling the space. The unit features easy-to-use controls, allowing users to adjust the temperature to their desired level. The Frigidaire FFTA1233U2 is equipped with a energy-efficient design, helping to lower electricity bills while still providing cool air. It also comes with a programmable timer, allowing users to set specific times for the unit to turn on or off, helping to save energy when the room is not in use. The unit is relatively easy to install, fitting into most standard size windows without the need for extensive modifications. The Frigidaire FFTA1233U2 has a sleek and simple design, blending in well with most room aesthetics. It is also relatively quiet when in operation, minimizing disruption to daily activities. Overall, the Frigidaire FFTA1233U2 is a reliable and efficient air-conditioning unit suitable for medium-sized rooms.

General
BrandFrigidaire
ModelFFTA1233U2 | FFTA1233U2
Productair-conditioning
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Frigidaire FFTA1233U2 below.

What does BTU stand for?

BTU stands for British Thermal Unit and is a unit used to indicate cooling power.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How often should I clean the filters of my Frigidaire air conditioner?

The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Frigidaire air conditioner at least four times a year.

How can I use the fan-only mode on the Frigidaire FFTA1233U2 air-conditioning?

To use the fan-only mode on the Frigidaire FFTA1233U2 air-conditioning, follow these steps: 1. Press the mode button and select "Fan Only" function. 2. Press the sleep button to activate the fan-only mode. 3. Note that this function is used when you want to circulate or exhaust air without cooling the room. 4. You can choose any fan speed except for "Auto Fan." 5. When in fan-only mode, the actual room temperature is displayed instead of the set temperature in cooling mode. 6. Fan-only mode can only be selected when the unit is in "remote sensing" mode (on units with this feature). 7. In fan-only mode, the fan remains on continuously. 8. To exit fan-only mode and return to the original program, press the sleep, mode, power, or arrow buttons.

Why does the temperature increase or decrease by 2°F after 30 minutes in cooling mode?

In cooling mode, after selecting the mode, the temperature selected will increase or decrease by 2°F after 30 minutes. Subsequently, the temperature will change by another 2°F after an additional 30 minutes. This new temperature will be maintained for 7 hours before returning to the initially selected temperature. To cancel the Sleep mode program at any time, simply press the Sleep button, Mode button, Power button, or the up and down buttons. This action will end the Sleep mode, and the air conditioner will resume its normal operation as originally programmed.

How do I activate the automatic ventilation function on the Frigidaire FFTA1233U2 air-conditioning?

To activate the automatic ventilation function on the Frigidaire FFTA1233U2 air-conditioning, follow these steps: 1. Press the "Fan" button. 2. Choose the "Auto" option. 3. Press to select. Note: The appliance automatically controls the fan speed during automatic fan mode. In cooling/eco mode, the fan starts at low speed and adjusts to higher speeds as the room temperature rises. In heating mode, the fan starts at low speed and adjusts to higher speeds as the room temperature decreases. Please be aware that this function is disabled in heating mode on 115V models.

What should I do if the automatic ventilation function is not adjusting the fan speed correctly?

To adjust the fan speed correctly when the automatic ventilation function is not working as expected on the Frigidaire FFTA1233U2 air-conditioning unit, follow these steps: 1. Press the fan button and select "Auto" to use the automatic ventilation function. 2. During automatic fan speed control, the unit will adjust the fan speed based on the room temperature. In cooling/eco mode, the fan starts at a low speed and increases as the room temperature rises. In heating mode, the fan starts at a low speed and increases as the room temperature decreases. 3. Note that this function is disabled in heating mode on 115V models. For specific guidance on adjusting the fan speed and utilizing the automatic ventilation function, refer to the user manual of the Frigidaire FFTA1233U2 air-conditioning unit.

Is the manual of the Frigidaire FFTA1233U2 available in English?

Yes, the manual of the Frigidaire FFTA1233U2 is available in English .

Is your question not listed? Ask your question here

No results