Frigidaire FFTA1233U2 manual

Frigidaire FFTA1233U2
9 · 1
PDF manual
 · 13 pages
English
manualFrigidaire FFTA1233U2
Hardware
3
2
4
1
2
3
4
5
1
6
2
3
7
8
.ytQ.oN
2
Centering/Support Blocks ( )
4 x 3 x 1
1
2
1
2
1
2
Stuffer Seal ( )
1 x 1 x 84
1
2
Seal ( )
1 x 1 x 25
1
2
Seal ( )
1 x 1 x 14
1
2
Seal ( )
1 x 3/8 x 25
Seal( )
1 x 3/8 x 14
Seal ( )
1 x 3/4 x 14
2
Hardware
2
1
1
Ground Wire (green)
2
13
9
10
11
12
14
15
1
.ytQ.oN
4
Trim Frame (top & bottom legs)
Grille Aluminum
Nuts (plastic)
Screw w/washer
4
Trim Frame (side legs)
Tooth washer for grounding screw
2

READ BEFORE INSTALLING UNIT

For Through-the-Wall Air Conditioners

1

Installation Instructions

NOTE:DO NOT USE ANY SCREWS OTHER THAN THOSE SPECIFIED HERE
Note that the air conditioner dimensions are: 24" wide,14 " high, and 19" deep (without front). Install air conditioner
according to these installation instructions to achieve the best performance. Save these installation instructions for future reference.
Do This First (for existing sleeve)
You may not need all parts in the kit. Discard unused parts.
Items in Kit
66129927394

INSTALLATION WARNINGS AND CAUTION

Carefully read the installation manual before beginning. Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.
Pay attention to danger and safety notices.
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that
may be exposed.
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and
install the unit. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils.
To prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit over an extended
period of time.
Handle air conditioner with care.
Make sure air conditioner does not fall during installation.
Grounding Screw
1
2

Manual

View the manual for the Frigidaire FFTA1233U2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Frigidaire FFTA1233U2 or do you need help? Ask your question here

Need help?

Do you have a question about the Frigidaire and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Frigidaire FFTA1233U2 specifications

Below you will find the product specifications and the manual specifications of the Frigidaire FFTA1233U2.

The Frigidaire FFTA1233U2 is an air-conditioning unit designed to cool a room efficiently. It is a window-mounted unit suitable for medium-sized rooms, capable of quickly and effectively cooling the space. The unit features easy-to-use controls, allowing users to adjust the temperature to their desired level. The Frigidaire FFTA1233U2 is equipped with a energy-efficient design, helping to lower electricity bills while still providing cool air. It also comes with a programmable timer, allowing users to set specific times for the unit to turn on or off, helping to save energy when the room is not in use. The unit is relatively easy to install, fitting into most standard size windows without the need for extensive modifications. The Frigidaire FFTA1233U2 has a sleek and simple design, blending in well with most room aesthetics. It is also relatively quiet when in operation, minimizing disruption to daily activities. Overall, the Frigidaire FFTA1233U2 is a reliable and efficient air-conditioning unit suitable for medium-sized rooms.

General
BrandFrigidaire
ModelFFTA1233U2 | FFTA1233U2
Productair-conditioning
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Frigidaire FFTA1233U2 below.

What does BTU stand for?

BTU stands for British Thermal Unit and is a unit used to indicate cooling power.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How often should I clean the filters of my Frigidaire air conditioner?

The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Frigidaire air conditioner at least four times a year.

How can I use the fan-only mode on the Frigidaire FFTA1233U2 air-conditioning?

To use the fan-only mode on the Frigidaire FFTA1233U2 air-conditioning, follow these steps: 1. Press the mode button and select "Fan Only" function. 2. Press the sleep button to activate the fan-only mode. 3. Note that this function is used when you want to circulate or exhaust air without cooling the room. 4. You can choose any fan speed except for "Auto Fan." 5. When in fan-only mode, the actual room temperature is displayed instead of the set temperature in cooling mode. 6. Fan-only mode can only be selected when the unit is in "remote sensing" mode (on units with this feature). 7. In fan-only mode, the fan remains on continuously. 8. To exit fan-only mode and return to the original program, press the sleep, mode, power, or arrow buttons.

Why does the temperature increase or decrease by 2°F after 30 minutes in cooling mode?

In cooling mode, after selecting the mode, the temperature selected will increase or decrease by 2°F after 30 minutes. Subsequently, the temperature will change by another 2°F after an additional 30 minutes. This new temperature will be maintained for 7 hours before returning to the initially selected temperature. To cancel the Sleep mode program at any time, simply press the Sleep button, Mode button, Power button, or the up and down buttons. This action will end the Sleep mode, and the air conditioner will resume its normal operation as originally programmed.

How do I activate the automatic ventilation function on the Frigidaire FFTA1233U2 air-conditioning?

To activate the automatic ventilation function on the Frigidaire FFTA1233U2 air-conditioning, follow these steps: 1. Press the "Fan" button. 2. Choose the "Auto" option. 3. Press to select. Note: The appliance automatically controls the fan speed during automatic fan mode. In cooling/eco mode, the fan starts at low speed and adjusts to higher speeds as the room temperature rises. In heating mode, the fan starts at low speed and adjusts to higher speeds as the room temperature decreases. Please be aware that this function is disabled in heating mode on 115V models.

What should I do if the automatic ventilation function is not adjusting the fan speed correctly?

To adjust the fan speed correctly when the automatic ventilation function is not working as expected on the Frigidaire FFTA1233U2 air-conditioning unit, follow these steps: 1. Press the fan button and select "Auto" to use the automatic ventilation function. 2. During automatic fan speed control, the unit will adjust the fan speed based on the room temperature. In cooling/eco mode, the fan starts at a low speed and increases as the room temperature rises. In heating mode, the fan starts at a low speed and increases as the room temperature decreases. 3. Note that this function is disabled in heating mode on 115V models. For specific guidance on adjusting the fan speed and utilizing the automatic ventilation function, refer to the user manual of the Frigidaire FFTA1233U2 air-conditioning unit.

Is the manual of the Frigidaire FFTA1233U2 available in English?

Yes, the manual of the Frigidaire FFTA1233U2 is available in English .

Is your question not listed? Ask your question here

No results