Frigidaire FFRE2233U2 manual

Frigidaire FFRE2233U2
8.5 · 1
PDF manual
 · 13 pages
English
manualFrigidaire FFRE2233U2
Preliminary instructions:

READ BEFORE INSTALLING UNIT

1
1. Check window opening size: the mounting parts furnished with this air conditioner are made to install ina wooden sill double-hung window. The standard partsare for window dimensions listed above. Open sash toa minimum of 19-1/4"(489mm). (FIG.1)NOTE: DO NOT USE ANY SCREWS OTHER THAN THOSE SPECIFIED HERE.Do the following before starting to install unit. See illustrations below.Check dimensions of your unit to determine model type:
Unit Height:
Unit Width:
Min. Window Opening:
Min. Window Width:
Max. Window Width:
2. Check condition of window: all wood parts of windowmust be in good shape and able to firmly hold the neededscrews. If not, make repairs before installing unit. 3. Check your storm windows: If your storm windowframe does not allow the clearance required, correct byadding a piece of wood as shown (FIG.2), or by removingstorm window while room air conditioner is being installed.
BY Platform
17-25/32
"
23-5/8"
19-1/4"
29"
41"
15,000~18,500 BTU
BN Platform
18-5/8
"
26-17/32"
19-1/4"
30"
41"
22,000~28,500 BTU
sash
1/2" minstorm window frame orother obstructionFIG.119-1/4" mininner sillouter sill
Capacity:
FIG.2
sash
1/2" minstorm window frame orother obstruction19-1/4" minboard thickness asrequired, along entire innerwindow sill; fasten to innersill with two nails or screws.1-1/2" mininner sillouter sill
66129926911
For BY Platform (15,000-18,500 BTU) + BN Platform (22,000-28,500 BTU) Air Conditioner
Pay attention to danger and safety notices.
To avoid risk of personal injury, property damage, or product damage due to the weight of this device and sharp edges that may
be exposed:
Air conditioners covered in this manual pose an excessive weight hazard. Two or more people are needed to move and install
the unit. Wear protective gloves whenever lifting or carrying the unit. AVOID the sharp metal fins of front and rear coils. To
prevent injury or strain, use proper lifting and carrying techniques when moving unit.
Carefully inspect location where air conditioner will be installed. Be sure it will support the weight of the unit overan extended
period of time.
Handle air conditioner with care.
Make sure air conditioner does not fall during installation.
If a new electrical outlet is required, have the outlet installed by a qualified electrician before installing unit.
Carefully read the installation manual before beginning.
Follow each step as shown.
Observe all local, state, and national electrical codes and by qualified, licensed, authorized personnel only.

INSTALLATION WARNINGS AND CAUTION

window sash seal
safety lock and
1/2
" long hex
head screw
top angle
foam gasket
washer head
locking screw
frame
assembly
(left)
side retainer
bottom rail
seal to unit
frame
assembly
(right)
1/2
" long
screws and
locknuts
locknut 3/4
"
long flat
head bolt
sill angle
bracket
window
support bracket
insulation
panel

Installation Instructions

Manual

View the manual for the Frigidaire FFRE2233U2 here, for free. This manual comes under the category air-conditioning and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Frigidaire FFRE2233U2 or do you need help? Ask your question here

Need help?

Do you have a question about the Frigidaire and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Frigidaire FFRE2233U2 specifications

Below you will find the product specifications and the manual specifications of the Frigidaire FFRE2233U2.

General
BrandFrigidaire
ModelFFRE2233U2
Productair-conditioning
LanguageEnglish
FiletypeUser manual (PDF), Installation Guide (PDF), Datasheet (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Frigidaire FFRE2233U2 below.

What does BTU stand for?

BTU stands for British Thermal Unit and is a unit used to indicate cooling power.

What does R-410A stand for?

R-410A is a refrigerant used in machines that cool to zero degrees Celsius.

How often should I clean the filters of my Frigidaire air conditioner?

The cleaner the filters, the better the air quality. This is why it is recommended to clean the filters of your Frigidaire air conditioner at least four times a year.

Is the manual of the Frigidaire FFRE2233U2 available in English?

Yes, the manual of the Frigidaire FFRE2233U2 is available in English .

Is your question not listed? Ask your question here

No results