View the manual for the FMS J-3 Cub V3 here, for free. This manual comes under the category radio controlled toys and has been rated by 3 people with an average of a 8.3. This manual is available in the following languages: English. Do you have a question about the FMS J-3 Cub V3 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the FMS J-3 Cub V3.
The FMS J-3 Cub V3 is a radio controlled toy with a length of 900 millimeters and a weight of 1320 grams. It operates on 4 channels and has a wingspan of 1400 millimeters. The toy requires 4 servos, each weighing 9 grams. The housing material is made of Expanded Polyolefin (EPO), ensuring durability and longevity. It comes with a 2200 mAh battery that provides a voltage of 11.1 volts. This battery is rechargeable and offers a flight time of approximately 5 minutes. The center of gravity (CG) of the toy is positioned at 65 millimeters. Assembly is required for the FMS J-3 Cub V3, with an estimated assembly time of 45 minutes. The difficulty level of assembly is considered intermediate, indicating that some experience and knowledge may be needed to properly set up and fly the toy. The FMS J-3 Cub V3 provides an enjoyable and engaging experience for enthusiasts of radio controlled toys. Its precise construction and design allow for stable and controlled flight. The toy's dimensions and weight make it suitable for outdoor use, where it can be easily seen and maneuvered. With its reliable performance and robust construction, the FMS J-3 Cub V3 is a great option for those who are looking for an intermediate level radio controlled toy. It offers a decent flight time and is made from quality materials to ensure its longevity.
| Brand | FMS |
| Model | J-3 Cub V3 | DPFMS106P |
| Product | radio controlled toy |
| EAN | 4251014772919 |
| Language | English |
| Filetype | User manual (PDF) |
| Length | 900 mm |
| Weight | 1320 g |
| Wingspan | 1400 mm |
| Center of Gravity (CG) | 65 mm |
| Channels quantity | 4 channels |
| Number of servos | 4 |
| Servo weight | 9 g |
| Housing material | Expanded Polyolefin (EPO) |
| Motor size | 3536-KV850 |
| Assembly required | Yes |
| Difficulty level | Intermediate |
| Flight time | 5 min |
| Product type | Airplane |
| Replica | Yes |
| Construction type | Plug-N-Play(PNP) |
| Engine type | Electric engine |
| Recommended age (min) | 14 yr(s) |
| Battery capacity | 2200 mAh |
| Battery voltage | 11.1 V |
| Assembly time | 45 min |
| Product color | Red, White |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the FMS J-3 Cub V3 below.
The FMS J-3 Cub V3 has a weight of 1320 g.
The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.
Make sure the battery is fully charged and properly connected. Also, check the on/off switch and ensure it is in the correct position for powering on the vehicle.
Check if there are any obstructions or interference sources in the surrounding area. Ensure the transmitter's antenna is fully extended and in a vertical position. Additionally, try changing the location and orientation of the transmitter to optimize the signal reception.
Check the battery level of the transmitter and ensure it is sufficiently charged. Also, make sure there are no obstructions or sources of interference between the transmitter and the aircraft. Additionally, ensure that the transmitter and aircraft are properly bound together.
Inspect the aircraft and check for any visible damage or loose connections. Examine the control surfaces and ensure they are properly aligned and functioning correctly. Also, inspect the propeller for any damage or obstructions. If necessary, consult the troubleshooting section of the manual for further guidance.
First, check the battery level of both the transmitter and the aircraft. Ensure they are sufficiently charged. Next, verify that the control surface linkages are properly connected and secure. Additionally, confirm that the control sticks on the transmitter are centered and in the correct mode for flying the aircraft. If the issue persists, refer to the manual for specific troubleshooting steps related to unresponsive controls.
Yes, the manual of the FMS J-3 Cub V3 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the FMS and is the answer not in the manual?
Question and answer
Number of questions: 0