View the manual for the Finnlo Technum 3507 here, for free. This manual comes under the category treadmill and has been rated by 1 people with an average of a 5.9. This manual is available in the following languages: English. Do you have a question about the Finnlo Technum 3507 or do you need help? Ask your question here




| Brand | Finnlo |
| Model | Technum 3507 | 3507 |
| Product | treadmill |
| EAN | 4005251350702 |
| Language | English |
| Filetype | User manual (PDF) |
| Training displayed parameters | Calories, Distance, Inclination, Speed, Time |
| Maximum user weight | 135 kg |
| Number of programs | 9 |
| Maximum speed | 16 km/h |
| Optional heart rate measurement | Chest belt |
| Standard heart rate measurement | Hand grip sensors |
| Foldable | Yes |
| Transport wheels | Yes |
| Built-in display | Yes |
| Display | LCD |
| Width | 1820 mm |
| Depth | 770 mm |
| Height | 1400 mm |
| Weight | 80000 g |
| Running area (W x L) | 445 x 1350 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Finnlo Technum 3507 below.
The Finnlo Technum 3507 has a weight of 80000 g.
As an adult, it is recommended to do moderately intensive exercise for at least 2.5 hours per week. Preferably spread over several days.
As a rule of thumb for your maximum heart rate, you can use 220 minus your age.
The Finnlo Technum 3507 has a height of 1400 mm.
The Finnlo Technum 3507 has a width of 1820 mm.
The Finnlo Technum 3507 has a depth of 770 mm.
Yes, the Finnlo Technum 3507 has a built-in LCD display.
Yes, the Finnlo Technum 3507 offers optional heart rate measurement with a chest belt.
Yes, the Finnlo Technum 3507 is foldable for easy storage.
The Finnlo Technum 3507 displays calories burned, distance, inclination, speed, and time during training.
The Finnlo Technum 3507 offers 9 different programs for versatile workouts.
To troubleshoot if the computer of the Finnlo Technum 3507 treadmill does not start up, follow these steps: 1. Check the incline setting: Make sure the incline is set to 0%. If it is not set to 0%, the treadmill cannot be started. 2. Position the safety key: Place the safety key in the designated position on the console. You should hear a beep sound indicating that the key is properly inserted. 3. Turn on the treadmill: Press the power button to turn on the treadmill. 4. Start the treadmill: Press the start button (usually labeled with an arrow symbol) to start the treadmill. The treadmill will start at a default speed of 1.0 km/h and 0% incline. 5. Adjust speed and incline: During your workout, you can increase or decrease the speed by pressing the speed buttons (+/-). Similarly, you can adjust the incline by pressing the incline buttons (+/-). If the computer still does not start up after following these steps, please refer to the troubleshooting section of the manual or contact customer support for further assistance.
To troubleshoot if the speed or incline settings are not changing in the program mode of the Finnlo Technum 3507 treadmill, follow these steps: 1. Check the incline setting: Ensure that the incline is set to 0% before starting the program. Use the incline buttons (+/-) to adjust the incline if needed. 2. Start the program: Press the program button to enter the program mode. Use the program buttons (P1-P9) to select the desired program. 3. Set the parameters: Once the program is selected, you may need to set parameters such as time or distance. Use the speed buttons (+/-) or distance buttons (+/-) to adjust the parameters as required. 4. Start the workout: Press the start button to begin the program. The treadmill will start at the default speed and incline settings specified by the program. 5. Adjust speed and incline during the workout: If you want to change the speed or incline during the program, use the speed buttons (+/-) or incline buttons (+/-) to make the adjustments. If the speed or incline settings are still not changing in the program mode, refer to the troubleshooting section of the manual or contact customer support for further assistance.
To troubleshoot if you are having difficulty treading on or off the Finnlo Technum 3507 treadmill, follow these steps: 1. Use the handrails: When treading on or off the treadmill, make sure to use the handrails for support and stability. This will help you maintain balance and prevent any accidents. 2. Face the computer: During your exercise, always face the computer on the treadmill. This will help you maintain proper posture and alignment while using the treadmill. 3. Press the stop button: If you want to stop the exercise, press the stop button on the console. Wait until the treadmill comes to a complete stop before stepping off. 4. Emergency case procedure: In case of an emergency, follow these steps: - Pull out the emergency key. - Grab both handles for support. - Jump onto the side rails of the treadmill. - Wait until the running belt comes to a complete stop. - Press the STOP button to turn off the treadmill. By following these steps, you should be able to tread on and off the Finnlo Technum 3507 treadmill safely and without difficulty.
To troubleshoot if the emergency stop key is not working on the Finnlo Technum 3507 treadmill, follow these steps: 1. Check the incline setting: Ensure that the incline is set to 0% before starting the treadmill. The emergency stop key may not work if the incline is not set to 0%. 2. Verify the position of the emergency key: Make sure the emergency key is properly inserted into the console. It should be fully inserted and secure. 3. Check the handrail connection: Ensure that the handrail connection is secure and properly connected to the console. If there is any loose connection, it may affect the functionality of the emergency stop key. 4. Test the emergency stop key: Press the emergency stop key firmly to see if it stops the treadmill. If it does not work, try removing and reinserting the key to ensure a proper connection. 5. Contact customer support: If the emergency stop key still does not work after following these steps, it is recommended to contact customer support for further assistance and troubleshooting. By following these steps, you can troubleshoot the issue with the emergency stop key on the Finnlo Technum 3507 treadmill.
To troubleshoot if the starting procedure of the Finnlo Technum 3507 treadmill is not working properly, follow these steps: 1. Check the incline setting: Ensure that the incline is set to 0% before starting the treadmill. The treadmill cannot be started if the incline is not set to 0%. 2. Position the safety key: Place the safety key in the designated position on the console. You should hear a beep sound indicating that the key is properly inserted. 3. Turn on the treadmill: Press the power button to turn on the treadmill. 4. Quick Start: If you want to start a quick workout, press the start button. The treadmill will start at a default speed of 1.0 km/h and 0% incline. 5. Program Mode: If you want to select a specific program, press the program button. Use the program buttons (P1-P9) to choose the desired program. Set the parameters such as time or distance if required. 6. Start the workout: Press the start button to begin the program. The treadmill will start according to the selected program's settings. If the starting procedure is still not working properly after following these steps, refer to the troubleshooting section of the manual or contact customer support for further assistance.
Yes, the manual of the Finnlo Technum 3507 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Finnlo and is the answer not in the manual?
Question and answer
Number of questions: 3Hi I would like to turn off the Bluetooth on my phone technum 3 and I don't know how to do it because the machine will start and it shows BT on the screen and the buttons doesn't work none of the buttons work
1 comment
To turn off the Bluetooth on the Finnlo Technum 3507 treadmill, follow these steps: 1. Press the STOP button to stop the treadmill. 2. Wait until the treadmill comes to a complete stop. 3. Press the - button to set the incline to 0%. 4. Use the handrails to tread on and off the treadmill. Please look in the direction of the computer during your exercise. 5. If you need to turn off the treadmill in an emergency case, follow these steps: - Pull out the emergency key. - Grab both handles. - Jump onto the side rails and wait until the running belt comes to a complete stop. - Press the STOP button.
This answer is automatically generatedMy equipment need replace lubricating oil, which lubricant I can use for it?
Doesnt work E7 What can i do?