View the manual for the Festool CTL SYS here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Festool CTL SYS or do you need help? Ask your question here


| Brand | Festool |
| Model | CTL SYS | 584173 |
| Product | vacuum cleaner |
| EAN | 4014549214275 |
| Language | English |
| Filetype | User manual (PDF), Safety instructions (PDF) |
| Input power | 1200 W |
| Capacity | 4.5 L |
| Container capacity (dust) | 3.5 L |
| Filter surface | 5357 cm² |
| Airflow | 50 l/s |
| Product color | Black, Green, White |
| Width | 296 mm |
| Depth | 396 mm |
| Height | 270 mm |
| Weight | 6900 g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Festool CTL SYS below.
Your Festool vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
The Festool CTL SYS has a weight of 6900 g.
The Festool CTL SYS has a height of 270 mm.
The Festool CTL SYS has a width of 296 mm.
The Festool CTL SYS has a depth of 396 mm.
To assemble your Festool CTL SYS vacuum cleaner, align the main unit with the base and securely push them together until you hear a click. To disassemble, press the release buttons on the side of the base unit and lift off the main unit.
The Festool CTL SYS has a maximum airflow of 3,900 liters per minute and a maximum suction capacity of 90 inches of water column.
It is recommended to clean the main filter after each use by gently tapping it against a hard surface to remove dust. If the filter becomes visibly dirty or clogged, it should be replaced with a new one.
Yes, the Festool CTL SYS vacuum cleaner is designed for both wet and dry extraction. However, ensure that the appropriate filter bag and/or filter elements are properly installed for the specific application.
To empty the Festool CTL SYS vacuum cleaner, first turn off the unit and unplug it from the power source. Open the vacuum's main compartment by releasing the latches. Then, carefully remove the dust bag and dispose of its contents.
The input power of the Festool CTL SYS is 1200 W. This means it has a high power output, allowing for efficient and effective cleaning.
The Festool CTL SYS has a capacity of 4.5 L. This is a decent size for a vacuum cleaner and allows for longer cleaning sessions without needing to empty the container.
The dust container capacity of the Festool CTL SYS is 3.5 L. This means it can hold a good amount of dust and debris before needing to be emptied, making it convenient for continuous cleaning.
The filter surface area of the Festool CTL SYS is 5357 cm². This is a large surface area, ensuring efficient filtration and preventing clogging, resulting in better suction and cleaner air output.
The airflow of the Festool CTL SYS is 50 l/s. This high airflow rate ensures strong suction power, allowing for effective cleaning even in hard-to-reach areas and on various surfaces.
Yes, the manual of the Festool CTL SYS is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Festool and is the answer not in the manual?
Question and answer
Number of questions: 0