View the manual for the Festool Cleantec CTL 36 here, for free. This manual comes under the category vacuum cleaners and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Festool Cleantec CTL 36 or do you need help? Ask your question here
| Brand | Festool |
| Model | Cleantec CTL 36 |
| Product | vacuum cleaner |
| Language | English |
| Filetype | User manual (PDF), Safety instructions (PDF) |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Festool Cleantec CTL 36 below.
Your Festool vacuum cleaner losing suction power can be due to the following causes: - The suction power is not set to maximum - The dust container or dust bag is full - The hose, brush or tube is clogged
A clean filter is important to maintain the vacuum cleaner's suction power. Therefore, check the filter regularly. When a filter is clogged, dust absorption decreases and energy consumption increases.
A commonly used method is to put a little washing powder in the dust container or the dust bag.
For allergy sufferers, vacuuming the house at least twice a week is recommended.
To connect the vacuum hose, insert the end with the arrow symbol firmly into the vacuum cleaner's suction inlet until it clicks. To disconnect, press the release button on the inlet and gently pull the hose out.
The Cleantec CTL 36 features a power knob on the control panel. Turning it clockwise increases the suction power, while turning it counterclockwise decreases it. Find the optimal power level for your cleaning task.
To empty the dust container, open the latch located on the front of the vacuum cleaner. Lift the container out, hold it over a waste bin, and press the release button to empty the collected dust and debris.
The automatic filter cleaning function extends the filter's lifespan by quickly and efficiently removing accumulated dust. To activate it, simply press the clean button on the control panel. The vacuum cleaner will automatically clean the filter while running.
After use, disconnect the vacuum cleaner from the power source. Remove the filter cartridge and tap it gently to remove excess dust. If needed, the filter can be rinsed with water, but ensure it is completely dry before reinserting it into the vacuum cleaner.
Yes, the manual of the Festool Cleantec CTL 36 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Festool and is the answer not in the manual?
Question and answer
Number of questions: 0