Ferm MSM1033 manual

Ferm MSM1033
7.5 · 1
PDF manual
 · 56 pages
English
manualFerm MSM1033
COMBINATION MITRE /
TABLE SAW
1300W - 210MM

MSM1033

WWW.FERM.COM
T
ABLE SAW
TABLE SAWT
1300
W
- 210MM
W - 210MMW
Original instructions 05
Übersetzung der Originalbetriebsanleitung 12
Vertaling van de oorspronkelijke gebruiksaanwijzing
21
Traduction de la notice originale 29
Traducción del manual original 37
Eredeti használati utasítás fordítása 45
EN
DE
NL
FR
ES
HU

Manual

View the manual for the Ferm MSM1033 here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 7.5. This manual is available in the following languages: English. Do you have a question about the Ferm MSM1033 or do you need help? Ask your question here

Need help?

Do you have a question about the Ferm and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ferm MSM1033 specifications

Below you will find the product specifications and the manual specifications of the Ferm MSM1033.

General
BrandFerm
ModelMSM1033
Productsaw
EAN8717479000630
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ferm MSM1033 below.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Ferm saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

Is the manual of the Ferm MSM1033 available in English?

Yes, the manual of the Ferm MSM1033 is available in English .

Is your question not listed? Ask your question here

No results