View the manual for the Ferm HDM1028 here, for free. This manual comes under the category drill machines and has been rated by 1 people with an average of a 6. This manual is available in the following languages: English. Do you have a question about the Ferm HDM1028 or do you need help? Ask your question here


Below you will find the product specifications and the manual specifications of the Ferm HDM1028.
| Brand | Ferm |
| Model | HDM1028 | HDM1028 |
| Product | drill machine |
| EAN | 8717479036639 |
| Language | English |
| Filetype | User manual (PDF) |
| Product color | Black, Blue, Grey, Metallic |
| Chuck type | SDS Plus |
| Soft grip | Yes |
| Input power | 850 W |
| Cord length | 3 m |
| AC input voltage | 230 V |
| AC input frequency | 50 Hz |
| Power source | AC |
| Rated speed (max) | 800 RPM |
| Drilling diameter in concrete (max) | - mm |
| Drilling diameter in steel (max) | - mm |
| Drilling diameter in wood (max) | - mm |
| Weight | - g |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ferm HDM1028 below.
1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.
The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.
The amount of sound varies a lot per brand and type of drill machine, it is therefore wise to wear hearing protection to be sure.
The Ferm HDM1028 has a weight of - g.
Yes, the manual of the Ferm HDM1028 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Ferm and is the answer not in the manual?
Question and answer
Number of questions: 0