Ferm FKE180 manual

Ferm FKE180
8.9 · 1
PDF manual
 · 8 pages
English
manualFerm FKE180
Product: Ferm Electronic Safe
Type FKE-180, art.nr. 380180
Security devices Electr. code, emergency key
Ferm, Genemuiden, The Netherlands
CAREFULLY READ THE INSTRUCTIONS
BEFORE YOU USE THE SAFE!
1. INTRODUCTION
The safe is suitable for putting away valuables from
theft. It has no fire proof construction and is therefore
not fire safe! In case of fire the safe can be opened by
the emergency key. Consult, if necessary, your supplier.
The maximum insured value has been fixed by the SKB
(foundation of quality rating for safes) at 7 2.250,-. In
case of putting away valuables over above mentioned
value, problems can arise with the insurance of these
valuables in case of calamities. Consult therefore your
insurance company.
2. SAFETY RULES
1. Don’t place the safe in a humid room.
2. Use the safe for its intended purpose only.
3. ENVIRONMENTAL PROTECTION
Recycling raw materials is prefered to dumping them
as waste. To prevent the machine from being damaged
during transport its packing must be strong. Insofar as
possible the packing consists of recyclable materials.
Because recycling is better for the environment, we
suggest you use as much as possible the recycling
methods.
Your safe contains batteries. Never
waste the batteries when they are
empty, but hand them in as "Small
Chemical Waste".
4. INSTALLATION
The safe can be placed practically everywhere on the
rubber feet.
However, when you want to use optimum safety, the
safe can be secured to a shelf or in a cupboard. There-
fore from the bottomside of the shelf, four bolts can
be screwed into the feet of the safe. The four bolts are
so called key bolts.
On this way the safe is fastened see
sjablone.
- Diameter of the holes: 10 mm.
Do not immure the safe! In case of break in
transmission Ferm B.V. cannot be hold
UK

English

2 Ferm
Ferm 15
W X D X H W X D X H Type D MN 1300
(mm) (mm) LR20
FKE-180 380180 350x250x250 340x190x240 4 x 1,5V 17
FKE-210 380210 380x300x300 370x240x285 4 x 1,5V 30
ART.NR
TYPE
mm x mm x mm
mm x mm x mm
kg.

FKE-180 FKE-210

Manual

View the manual for the Ferm FKE180 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.9. This manual is available in the following languages: English. Do you have a question about the Ferm FKE180 or do you need help? Ask your question here

Need help?

Do you have a question about the Ferm and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ferm FKE180 specifications

Below you will find the product specifications and the manual specifications of the Ferm FKE180.

General
BrandFerm
ModelFKE180
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ferm FKE180 below.

How do I properly set the cutting depth on my Ferm FKE180?

To set the cutting depth on your Ferm FKE180, locate the depth adjustment knob on the machine. Turn the knob to adjust the depth as per your requirement. Ensure the blade is at the desired depth before starting the operation.

What is the recommended blade speed for cutting different materials using the Ferm FKE180?

The recommended blade speed for cutting different materials using the Ferm FKE180 can be found in the machine's specifications. Generally, it is advisable to refer to the manufacturer's guidelines to determine the appropriate blade speed for each specific material.

How do I change the blade on my Ferm FKE180?

Changing the blade on your Ferm FKE180 is a straightforward process. First, ensure the machine is switched off and unplugged. Then, locate and loosen the blade retaining nut using the provided wrench or tool. Remove the old blade, insert the new blade, and tighten the retaining nut securely. Always refer to the manual for any specific instructions or safety precautions.

How can I ensure accurate and straight cuts with my Ferm FKE180?

To achieve accurate and straight cuts with your Ferm FKE180, it is crucial to pay attention to the alignment of the workpiece and the machine. Ensure the workpiece is properly secured and positioned, allowing for a stable cutting process. Additionally, maintain a steady and controlled cutting speed, avoiding excessive force or rushing the cut.

What safety precautions should I follow when using the Ferm FKE180?

It is essential to prioritize safety when operating the Ferm FKE180. Some important precautions include wearing appropriate personal protective equipment, such as safety glasses, gloves, and ear protection. Always keep your hands at a safe distance from the blade and never attempt to make adjustments or perform maintenance while the machine is running. Regularly inspect the machine for any signs of damage or wear and report any concerns to a qualified technician.

Is the manual of the Ferm FKE180 available in English?

Yes, the manual of the Ferm FKE180 is available in English .

Is your question not listed? Ask your question here

No results