Ferm CSM1033 manual

Ferm CSM1033
9.1 · 1
PDF manual
 · 76 pages
English
manualFerm CSM1033
CIRCULAR SAW
1200W - 185MM

CSM1033

WWW.FERM.COM
CIR
CIR
C
ULAR SAW
1200
W
- 185MM
- 185MM
1200
W
- 185MM
- 185MM
Original instructions 03
Übersetzung der Originalbetriebsanleitung 09
Vertaling van de oorspronkelijke gebruiksaanwijzing
16
Traduction de la notice originale 22
Traducción del manual original 28
Tradução do manual original 35
Traduzione delle istruzioni originali 41
Översättning av bruksanvisning i original 47
Alkuperäisten ohjeiden käännös 53
Oversatt fra orginal veiledning 59
Oversættelse af den originale brugsanvisning 65
EN
DE
NL
FR
ES
PT
IT
SV
FI
NO
DA

Manual

View the manual for the Ferm CSM1033 here, for free. This manual comes under the category saws and has been rated by 1 people with an average of a 9.1. This manual is available in the following languages: English. Do you have a question about the Ferm CSM1033 or do you need help? Ask your question here

Need help?

Do you have a question about the Ferm and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ferm CSM1033 specifications

Below you will find the product specifications and the manual specifications of the Ferm CSM1033.

General
BrandFerm
ModelCSM1033 | CSM1033
Productsaw
EAN8717479000388
LanguageEnglish
FiletypeUser manual (PDF)
Power
Input power1200 W
Cable length3 m
AC input voltage230 V
Power sourceAC
Performance
Idle speed (max)5000 RPM
Blade diameter185 mm
Blade bore20 mm
Cutting depth (90º)65 mm
Cutting depth (45º)43 mm
Weight & dimensions
Weight5350 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ferm CSM1033 below.

What is the weight of the Ferm CSM1033?

The Ferm CSM1033 has a weight of 5350 g.

What is the best way to clean my saw blade?

1. Wipe sawdust from the saw blade with a brush. 2. Spray the saw blade with oven cleaner and leave for 30 minutes. 3. Remove the oven cleaner and dirt with a dry cloth. 4. Grease saw blade with Vaseline.

My saw blade is blunt. What now?

If there is resin or other debris on the blade, it may look like the blade is blunt. If the saw blade has been thoroughly cleaned and is still blunt, it is recommended to have the saw blade sharpened.

How do I remove rust from my Ferm saw?

1. Soak the rusty part in vinegar until completely soaked through. 2. Let the vinegar work on the rust for 24 hours. 3. Remove the rust with a wire brush or aluminium foil.

What does '16V' or '20V' mean?

The maximum achievable charge level is expressed with 16V or 20V. The V in this case stands for Volt.

Do I have to wear hearing protection when using a saw?

The amount of sound varies a lot per brand and type of saw, it is therefore wise to wear hearing protection to be sure.

Is the manual of the Ferm CSM1033 available in English?

Yes, the manual of the Ferm CSM1033 is available in English .

Is your question not listed? Ask your question here

No results