Ferm ATM1036 manual

Ferm ATM1036
8.8 · 1
PDF manual
 · 44 pages
English
manualFerm ATM1036
EN
2 Ferm

AIR TOOL SET 5 PCS.

Contents:
1. Machine data
2. Safety instructions
3. Use
Read the safety and operating
instructions of the air tool set and the
compressor before using the appliance!

1. Machine data

Spray gun
Operating pressure 4.5 - 6 bar
Nozzle diameter 1.5 mm
Aluminium cup capacity 600 cc
Weight 0.55 kg
Tyre inflating gun with pressure gauge
Operating pressure 0 - 8.5 bar
Length of hose 350 mm
Weight 0.40 kg
Air blow gun
Recommended pressure 2 - 4 bar
Nozzle diameter 2.0 mm
Weight 0.15 kg
Air engine cleaning gun
Recommended pressure 2 - 4 bar
Nozzle diameter 2.0 mm
Aluminium nozzle length 255 mm
Weight 0.55 kg
5m pu hose
Type 5 mm x 8 mm
Max. pressure 8 bar
Coupler Universal/DIN
Weight 0.25 kg

2. Safety instructions

Always read the user manual of the
compressor and of the objects and/or
materials you use.
• Avoidtoohighpressure
• Neverbloworsprayindirectionofyourselfor
others; this could cause serious injury.
• Keepbystandersandpetsaway
• Childrenandanimalsshouldbekeptfaraway
from the area of operation of the machine.
• Ifyouusethecompressortospraypaint:
a) Donotworkinenclosedspacesornearnaked
flames.
b) Makesurethattheenvironmentinwhichyou
willbeworkinghasdedicatedventilation.
c) Protectyournoseandmouthwithadedicated
mask
• Ifthecompressorisnolongerinuse,always
take the plug out of the plug socket.
• Alwaysmakesurethatcompressed-airhoses
areusedforcompressedairandwhichare
characterised by a maximum pressure
adjusted to that of the compressor. Do not try
to repair the hose if it is damaged.

3. Use

Onlyusethecompressorwithaccessoryinagood
ventilated area.
• ConnectthePUhosebetweencompressor
and accessory
• Slidethehose-couplerontheaccessoryuntil
thecouplerclicks.Nowthehoseisconnected
correctly.
• Toreleasethecoupler,pulltheoutsidering
backwards.
Spray gun
Paint and solvents are very flammable. Therefore
checkthefollowing:
• Onlysprayingoodventilatedareas
• Useaspray-maskduringspraying
• Avoidopenfireandsmokingduringspraying
• Donotsprayinanareawithaburningstove
• Neverspraywithfuelofotherflammable
products
• Wearsafetygoggles
Toobtainthebestresults,itisimportantthatyou
prepare the surface to be sprayed and thin the
painttothecorrectviscosity,beforeyouoperate
yourspraygun.Alwaysensurethatthesurfacesto
besprayedarefreefromdust,dirtandgrease.
Make sure that you have masked the areas that
shouldnotbesprayed,usingagoodquality
masking tape. The paint or fluid to be sprayed
should be thoroughly mixed and free from lumps
or other particles. Many substances can be
sprayedwithyourspraygun,butalwayscheckthe
manufacturers recommendations before
purchasing your paint.
Toobtainthebestresults,keepyourspraygun
level and parallel to the surface at all times.
Keepthenozzle25-30cmfromthesurfaceand

Manual

View the manual for the Ferm ATM1036 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.8. This manual is available in the following languages: English. Do you have a question about the Ferm ATM1036 or do you need help? Ask your question here

Need help?

Do you have a question about the Ferm and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Ferm ATM1036 specifications

Below you will find the product specifications and the manual specifications of the Ferm ATM1036.

General
BrandFerm
ModelATM1036 | ATM1036
Productnot categorized
EAN8717479001330
LanguageEnglish
FiletypeUser manual (PDF)

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Ferm ATM1036 below.

Is the manual of the Ferm ATM1036 available in English?

Yes, the manual of the Ferm ATM1036 is available in English .

Is your question not listed? Ask your question here

No results