Fanvil X2 manual

Fanvil X2
7.7 · 1
PDF manual
 · 72 pages
English
manualFanvil X2
52 / 72
x -- Matches any single digit that is dialed.
[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated
by commas, or a list of digits.
Destination
Set Destination address. This is for IP direct.
Port
Set the Signal port, and the default is 5060 for SIP.
Alias
Set the Alias. This is the text to be added, replaced or deleted. It is an optional
item.
Note: There are four types of aliases.
all: xxx xxx will replace the phone number.
add: xxx xxx will be dialed before any phone number.
del The characters will be deleted from the phone number.
rep: xxx xxx will be substituted for the specified characters.
Suffix
Characters to be added at the end of the phone number. It is an optional item.
Delete Length
Set the number of characters to be deleted. For example, if this is set to 3, the
phone will delete the first 3 digits of the phone number. It is an optional item.
Examples of different alias application
This feature allows the user to create rules to make dialing easier. There are several different options for
dial rules. The examples below will show how it works.
Example 1: Global Substitution
It seems like a shortcut to dial out. When user dial “32”, the dialed number will be replaced of “833333”.
But if user dials “322”, the device will still send “322” rather than “8333332”. The replacement rules should be
matched globally.
Figure 66 - Global Substitution Configuration
Example 2: Local Substitution
To dial a long distance call to Beijing requires dialing area code 010 before the local phone number. Using
this feature 1 can be substituted for 010. For example, to call 62213123 would only require dialing 162213123
instead of 01062213123.

Manual

View the manual for the Fanvil X2 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Fanvil X2 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Fanvil and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Fanvil X2 specifications

Below you will find the product specifications and the manual specifications of the Fanvil X2.

General
BrandFanvil
ModelX2 | X2
Productphone
LanguageEnglish
FiletypeUser manual (PDF)
Phone features
Lines quantity2 lines
Call waitingYes
IntercomYes
Caller IDYes
Call forwardingYes
Call transferYes
Call parkYes
Call pick upYes
RedialingYes
Do not disturb functionYes
Answering machineYes
Conference callYes
Phonebook capacity500 entries
Call log entries100
Message-waiting indicator (MWI)Yes
Phonebook sharingYes
Call holdYes
Number of VoIP accounts-
Display
DisplayLCD
Display diagonal2.8 "
Display resolution320 x 240 pixels
TouchscreenNo
Ports & interfaces
Ethernet LAN (RJ-45) ports2
RJ-9 ports quantity2
Microphone inYes
Headphone outputs1
Certificates
CertificationCE/FCC
Audio
Microphone muteYes
Voice codecsG.711a, G.711u, G.722, G.723.1, G.726, G.729ab
Voice activity detectionYes
Comfort noise generation (CNG)Yes
Noise reductionYes
Packet loss concealment (PLC)Yes
Speakerphone-
Performance
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Network
Ethernet LANYes
Ethernet LAN interface typeFast Ethernet
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
BluetoothNo
Networking standardsIEEE 802.1x
Quality of Service (QoS) supportYes
Supported network protocolsSIP2.0 UDP / TCP /TLS, RTP / RTCP /SRTP, STUN, DHCP, PPPoE, 802.1x, Open VPN, SNTP, FTP / TFTP, HTTP / HTTPS, TR069
SyslogYes
Management features
Firmware upgradeableYes
Keypad number of keys23
Number of function keys3
Volume controlDigital
Packaging content
Number of handles included- pc(s)
Cables includedLAN (RJ-45)
Power
AC adapter output voltage5 V
AC adapter output current0.6 A
Power consumption (typical)1.6 W
Power over Ethernet (PoE)No
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 65 %
Design
Product colorBlack
Handset type-
Product typeIP Phone
Weight & dimensions
Width101 mm
Depth147 mm
Height107.5 mm
Package width197 mm
Package depth110 mm
Package height62 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fanvil X2 below.

What certifications does the Fanvil X2 have?

The Fanvil X2 has the following certifications: CE/FCC.

What is the screen size of the Fanvil X2?

The screen size of the Fanvil X2 is 2.8 ".

What is the height of the Fanvil X2?

The Fanvil X2 has a height of 107.5 mm.

What is the screen resolution of the display of the Fanvil X2?

The screen resolution of the Fanvil X2 is 320 x 240 pixels.

What is the width of the Fanvil X2?

The Fanvil X2 has a width of 101 mm.

What is the depth of the Fanvil X2?

The Fanvil X2 has a depth of 147 mm.

Is the manual of the Fanvil X2 available in English?

Yes, the manual of the Fanvil X2 is available in English .

Is your question not listed? Ask your question here

No results