Fanvil X2 manual

Fanvil X2
7.7 · 1
PDF manual
 · 72 pages
English
manualFanvil X2
48 / 72
Table 2 - SIP Settings for Lines on Web
Parameters
Description
Basic Settings
Line Status
Display the current line status at page loading. To get the up to
date line status, user has to refresh the page manually.
Username
Enter the username of the service account.
Display Name
Enter the display name to be sent in a call request.
Authentication Name
Enter the authentication name of the service account
Authentication Password
Enter the authentication password of the service account
SIP Proxy Server Address
Enter the IP or FQDN address of the SIP proxy server
SIP Proxy Server Port
Enter the SIP proxy server port, default is 5060
Outbound Proxy Address
Enter the IP or FQDN address of outbound proxy server
provided by the service provider
Outbound Proxy Port
Enter the outbound proxy port, default is 5060
Realm
Enter the SIP domain if requested by the service provider
Activate
Whether the service of the line should be activated
Codec Settings
Set the priority and availability of the codecs by adding or
remove them from the list.
Advanced Settings
Call Forward Unconditional
Enable unconditional call forward, all incoming calls will be
forwarded to the number specified in the next field
Call Forward Number for
Unconditional
Set the number of unconditional call forward
Call Forward on Busy
Enable call forward on busy, when the phone is busy, any
incoming call will be forwarded to the number specified in the
next field
Call Forward Number for Busy
Set the number of call forward on busy
Call Forward on No Answer
Enable call forward on no answer, when an incoming call is not
answered within the configured delay time, the call will be
forwarded to the number specified in the next field
Call Forward Number for No
Answer
Set the number of call forward on no answer
Call Forward Delay for No
Answer
Set the delay time of not answered call before being forwarded
Enable Hotline
Enable hotline configuration, the device will dial to the specific
number immediately at audio channel opened by off-hook
handset or turn on hands-free speaker or headphone
Hotline Number
Set the hotline dialing number

Manual

View the manual for the Fanvil X2 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Fanvil X2 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Fanvil and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Fanvil X2 specifications

Below you will find the product specifications and the manual specifications of the Fanvil X2.

General
BrandFanvil
ModelX2 | X2
Productphone
LanguageEnglish
FiletypeUser manual (PDF)
Phone features
Lines quantity2 lines
Call waitingYes
IntercomYes
Caller IDYes
Call forwardingYes
Call transferYes
Call parkYes
Call pick upYes
RedialingYes
Do not disturb functionYes
Answering machineYes
Conference callYes
Phonebook capacity500 entries
Call log entries100
Message-waiting indicator (MWI)Yes
Phonebook sharingYes
Call holdYes
Number of VoIP accounts-
Display
DisplayLCD
Display diagonal2.8 "
Display resolution320 x 240 pixels
TouchscreenNo
Ports & interfaces
Ethernet LAN (RJ-45) ports2
RJ-9 ports quantity2
Microphone inYes
Headphone outputs1
Certificates
CertificationCE/FCC
Audio
Microphone muteYes
Voice codecsG.711a, G.711u, G.722, G.723.1, G.726, G.729ab
Voice activity detectionYes
Comfort noise generation (CNG)Yes
Noise reductionYes
Packet loss concealment (PLC)Yes
Speakerphone-
Performance
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Network
Ethernet LANYes
Ethernet LAN interface typeFast Ethernet
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
BluetoothNo
Networking standardsIEEE 802.1x
Quality of Service (QoS) supportYes
Supported network protocolsSIP2.0 UDP / TCP /TLS, RTP / RTCP /SRTP, STUN, DHCP, PPPoE, 802.1x, Open VPN, SNTP, FTP / TFTP, HTTP / HTTPS, TR069
SyslogYes
Management features
Firmware upgradeableYes
Keypad number of keys23
Number of function keys3
Volume controlDigital
Packaging content
Number of handles included- pc(s)
Cables includedLAN (RJ-45)
Power
AC adapter output voltage5 V
AC adapter output current0.6 A
Power consumption (typical)1.6 W
Power over Ethernet (PoE)No
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 65 %
Design
Product colorBlack
Handset type-
Product typeIP Phone
Weight & dimensions
Width101 mm
Depth147 mm
Height107.5 mm
Package width197 mm
Package depth110 mm
Package height62 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fanvil X2 below.

What certifications does the Fanvil X2 have?

The Fanvil X2 has the following certifications: CE/FCC.

What is the screen size of the Fanvil X2?

The screen size of the Fanvil X2 is 2.8 ".

What is the height of the Fanvil X2?

The Fanvil X2 has a height of 107.5 mm.

What is the screen resolution of the display of the Fanvil X2?

The screen resolution of the Fanvil X2 is 320 x 240 pixels.

What is the width of the Fanvil X2?

The Fanvil X2 has a width of 101 mm.

What is the depth of the Fanvil X2?

The Fanvil X2 has a depth of 147 mm.

Is the manual of the Fanvil X2 available in English?

Yes, the manual of the Fanvil X2 is available in English .

Is your question not listed? Ask your question here

No results