Fanvil X2 manual

Fanvil X2
7.7 · 1
PDF manual
 · 72 pages
English
manualFanvil X2
28 / 72

6.1.1 Make / Receive Second Call

The device can support up to multichannel concurrent calls. When there is already a call established,
user can still answer another incoming call on either lines or make a second call on either lines.
Second Incoming Call
When there is another incoming call during talking a phone call, this call will be waiting for user to answer
it. User will see the call message in the middle of current screen. The device will not be ringing but playing call
waiting tone in the audio channel of the current call. User can accept or reject the call same as normal
incoming call. When the waiting call is answered, the first call will be put on hold automatically. User can
press volume select key (down button) to switch screen page, and answer second Incoming call by pressing
[Answer] button.
Figure 38 - Second Incoming Call Screen
Second Outgoing Call
To make a second call, user may press [New] / [XFER] / [Conf] button to make a new call to make new
call on the default line. When user is making a second call with the above methods, the first call could be
place on hold manually first or will be put on hold automatically at second dial.
Switching between Two Calls
When there are two calls established, user will see a dual calls screen as the following picture.
Figure 39 - Dual Calls
User can press volume select key (down button) to switch screen page, and switch call focus by pressing
[Hold] / [Resume] button.

Manual

View the manual for the Fanvil X2 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Fanvil X2 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Fanvil and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Fanvil X2 specifications

Below you will find the product specifications and the manual specifications of the Fanvil X2.

General
BrandFanvil
ModelX2 | X2
Productphone
LanguageEnglish
FiletypeUser manual (PDF)
Phone features
Lines quantity2 lines
Call waitingYes
IntercomYes
Caller IDYes
Call forwardingYes
Call transferYes
Call parkYes
Call pick upYes
RedialingYes
Do not disturb functionYes
Answering machineYes
Conference callYes
Phonebook capacity500 entries
Call log entries100
Message-waiting indicator (MWI)Yes
Phonebook sharingYes
Call holdYes
Number of VoIP accounts-
Display
DisplayLCD
Display diagonal2.8 "
Display resolution320 x 240 pixels
TouchscreenNo
Ports & interfaces
Ethernet LAN (RJ-45) ports2
RJ-9 ports quantity2
Microphone inYes
Headphone outputs1
Certificates
CertificationCE/FCC
Audio
Microphone muteYes
Voice codecsG.711a, G.711u, G.722, G.723.1, G.726, G.729ab
Voice activity detectionYes
Comfort noise generation (CNG)Yes
Noise reductionYes
Packet loss concealment (PLC)Yes
Speakerphone-
Performance
Dual-Tone Multi-Frequency (DTMF) modesIn-band, Out-of band, SIP info
Network
Ethernet LANYes
Ethernet LAN interface typeFast Ethernet
Wi-FiNo
Ethernet LAN data rates10, 100 Mbit/s
BluetoothNo
Networking standardsIEEE 802.1x
Quality of Service (QoS) supportYes
Supported network protocolsSIP2.0 UDP / TCP /TLS, RTP / RTCP /SRTP, STUN, DHCP, PPPoE, 802.1x, Open VPN, SNTP, FTP / TFTP, HTTP / HTTPS, TR069
SyslogYes
Management features
Firmware upgradeableYes
Keypad number of keys23
Number of function keys3
Volume controlDigital
Packaging content
Number of handles included- pc(s)
Cables includedLAN (RJ-45)
Power
AC adapter output voltage5 V
AC adapter output current0.6 A
Power consumption (typical)1.6 W
Power over Ethernet (PoE)No
Operational conditions
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 65 %
Design
Product colorBlack
Handset type-
Product typeIP Phone
Weight & dimensions
Width101 mm
Depth147 mm
Height107.5 mm
Package width197 mm
Package depth110 mm
Package height62 mm
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fanvil X2 below.

What certifications does the Fanvil X2 have?

The Fanvil X2 has the following certifications: CE/FCC.

What is the screen size of the Fanvil X2?

The screen size of the Fanvil X2 is 2.8 ".

What is the height of the Fanvil X2?

The Fanvil X2 has a height of 107.5 mm.

What is the screen resolution of the display of the Fanvil X2?

The screen resolution of the Fanvil X2 is 320 x 240 pixels.

What is the width of the Fanvil X2?

The Fanvil X2 has a width of 101 mm.

What is the depth of the Fanvil X2?

The Fanvil X2 has a depth of 147 mm.

Is the manual of the Fanvil X2 available in English?

Yes, the manual of the Fanvil X2 is available in English .

Is your question not listed? Ask your question here

No results