View the manual for the Fanvil X2 here, for free. This manual comes under the category phones and has been rated by 1 people with an average of a 7.7. This manual is available in the following languages: English. Do you have a question about the Fanvil X2 or do you need help? Ask your question here




Below you will find the product specifications and the manual specifications of the Fanvil X2.

| Lines quantity | 2 lines |
| Call waiting | Yes |
| Intercom | Yes |
| Caller ID | Yes |
| Call forwarding | Yes |
| Call transfer | Yes |
| Call park | Yes |
| Call pick up | Yes |
| Redialing | Yes |
| Do not disturb function | Yes |
| Answering machine | Yes |
| Conference call | Yes |
| Phonebook capacity | 500 entries |
| Call log entries | 100 |
| Message-waiting indicator (MWI) | Yes |
| Phonebook sharing | Yes |
| Call hold | Yes |
| Number of VoIP accounts | - |
| Display | LCD |
| Display diagonal | 2.8 " |
| Display resolution | 320 x 240 pixels |
| Touchscreen | No |
| Ethernet LAN (RJ-45) ports | 2 |
| RJ-9 ports quantity | 2 |
| Microphone in | Yes |
| Headphone outputs | 1 |
| Certification | CE/FCC |
| Microphone mute | Yes |
| Voice codecs | G.711a, G.711u, G.722, G.723.1, G.726, G.729ab |
| Voice activity detection | Yes |
| Comfort noise generation (CNG) | Yes |
| Noise reduction | Yes |
| Packet loss concealment (PLC) | Yes |
| Speakerphone | - |
| Dual-Tone Multi-Frequency (DTMF) modes | In-band, Out-of band, SIP info |
| Ethernet LAN | Yes |
| Ethernet LAN interface type | Fast Ethernet |
| Wi-Fi | No |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Bluetooth | No |
| Networking standards | IEEE 802.1x |
| Quality of Service (QoS) support | Yes |
| Supported network protocols | SIP2.0 UDP / TCP /TLS, RTP / RTCP /SRTP, STUN, DHCP, PPPoE, 802.1x, Open VPN, SNTP, FTP / TFTP, HTTP / HTTPS, TR069 |
| Syslog | Yes |
| Firmware upgradeable | Yes |
| Keypad number of keys | 23 |
| Number of function keys | 3 |
| Volume control | Digital |
| Number of handles included | - pc(s) |
| Cables included | LAN (RJ-45) |
| AC adapter output voltage | 5 V |
| AC adapter output current | 0.6 A |
| Power consumption (typical) | 1.6 W |
| Power over Ethernet (PoE) | No |
| Operating temperature (T-T) | 0 - 40 °C |
| Operating relative humidity (H-H) | 10 - 65 % |
| Product color | Black |
| Handset type | - |
| Product type | IP Phone |
| Width | 101 mm |
| Depth | 147 mm |
| Height | 107.5 mm |
| Package width | 197 mm |
| Package depth | 110 mm |
| Package height | 62 mm |
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Fanvil X2 below.
The Fanvil X2 has the following certifications: CE/FCC.
The screen size of the Fanvil X2 is 2.8 ".
The Fanvil X2 has a height of 107.5 mm.
The screen resolution of the Fanvil X2 is 320 x 240 pixels.
The Fanvil X2 has a width of 101 mm.
The Fanvil X2 has a depth of 147 mm.
Yes, the manual of the Fanvil X2 is available in English .
Is your question not listed? Ask your question here
No results
Need help?
Do you have a question about the Fanvil and is the answer not in the manual?
Question and answer
Number of questions: 0