1. Select the video input by pressing the appropriate button (HDMI or XTP).
The EDID information is shown in a read-only panel.
2. To adjust Brightness, Contrast, Detail, or Overscan, press the appropriate button. A
small window opens to the right of the screen. For Brightness, Contrast, and Detail,
the window shows the current value with right and left arrows to increment or decrement the value. To change the value more quickly, use the slider underneath.To reset the value to default, press the default value. The default value for Brightness,
Contrast, and Detail is 64. All three parameters can be adjusted to any value between 1
and 127.
3. Press Overscan. A small window opens offering the options 0%, 2.5%, and 5%. The default
setting is 5%.
4. Press Exit to save the changes and return to the Input screen.
OffChangeEnableDisableFigure 15. Advanced ScreenThe System and GUI Project panels are read only, providing information about the system.
Menu PIN
Press Change to open the PINSetup window. The PIN setup options allow you to enable,
disable, or change the setup menu PIN. The PIN is a 4-digit number. Each digit can have any value from 0-9.
1. Press a number on the keypad. A blue circle appears in the first box.
Enter New Menu PIN
456
7
8
9
0
213
Cancel
Back
Figure 16. Numeric Keypad for Setting PIN
2. Select the other three digits for the PINs. The fourth circle appears momentarily and then the
screen changes to ConfirmNewMenuPin.
3. Enter the PIN a second time. When the PIN entered on the second occasion matches the
PIN entered on the first occasion, the PIN is set and the dialog closes.
Communication LED
The LED (see figure 2,
A
on page 6) can be enabled or disabled.
TLP Pro 1220, TLP Pro 1520, and TLP Pro 1720 Series • Setup Menu 19
Manual
View the manual for the Extron TLP Pro 1720TG here, for free. This manual comes under the category monitors and has been rated by 1 people with an average of a 7.9. This manual is available in the following languages: English. Do you have a question about the Extron TLP Pro 1720TG or do you need help? Ask your question here
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron TLP Pro 1720TG below.
What screen dimensions does my monitor have?
The size of your monitor is usually expressed in inches, 1 inch is 2.54 centimetres. The size is the diagonal size of your monitor, so you measure the screen from bottom left to top right.
What is HDMI?
HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.
What is the screen size of the Extron TLP Pro 1720TG?
The screen size of the Extron TLP Pro 1720TG is 17.3 ".
What is the screen resolution of the display of the Extron TLP Pro 1720TG?
The screen resolution of the Extron TLP Pro 1720TG is 1920 x 1080 pixels.
Is the manual of the Extron TLP Pro 1720TG available in English?
Yes, the manual of the Extron TLP Pro 1720TG is available in English .
Need help?
Do you have a question about the Extron and is the answer not in the manual?
Question and answer
Number of questions: 0