Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

SMD202 Power Up Procedure

NOTE: Before powering on the SMD202, ensure that all necessary devices are
connected properly. Devices do not need to be powered.
Connect the external power supply to a 100 to 240 VAC supply (see Rear Panel Features
on page9). The DC power LED lights and the SMD202 undergoes a self testing
sequence. When connected to a network, the front panel network LED indicator lights green
to indicate the SMD202 is ready to decode.

Hardware Setup Overview

NOTE: If it is difficult to access the device after installation, configure the
communications settings of the SMD202 prior to starting (see Communications
Submenu on page123).
1. If the SMD202 has been on for configuration, turn it off and disconnect the SMD202
and all connected devices.
2. Mount the SMD202 (see Mounting the SMD202 on page151).
3. Connect one end of an RJ-45 cable to the rear panel LAN connector on the SMD202
(see Rear Panel Features on page9). Connect the other end of the RJ-45 cable
to the local network.
4. Connect a compatible output device to the rear panel (see Rear Panel Features on
page9) and power it on.
5. Connect a control device to the SMD202 by one of the following connections:
a. The front panel config port (see Front Panel Configuration Port on page128).
b. The rear panel RS-232 port (see RS-232 Port on page127).
c. The Ethernet connection. Configure the network settings of the control PC so it is
compatible with the network the SMD202 is connected to (see LAN (Ethernet)
Port on page129).
6. Connect the external power supply output connector to the SMD202 (see Rear Panel
Features on page9), then connect the power supply to a 100 to 240 VAC, 50 Hz
or 60 Hz power source. The SMD202 powers up automatically and undergoes a self
testing sequence (see the SMD202 Power Up Procedure, above).
7. From the control PC, access the user interface of the SMD202 (see Accessing the
Embedded Web Pages on page16).
8. Select a stream, clip, or image to decode (see Player Page Overview on page22).
9. If necessary, set the decoder output for the connected display (see Video Output on
page3 and Video Configuration on page49).
10. Press Play on the software interface (see Player Controls Features on page23)
or on the optional remote control (see IR Remote Control on page108) to begin
decoding the selected source.
SMD202 • Panels and Cabling 14

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results