Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

Glossary

Advanced Audio Coding (AAC) A standardized compression and encoding scheme for
lossy (low quality) digital audio. Higher bit rates provide higher quality. Part of the MPEG-2
and MPEG-4 specifications. The SMD202 supports AAC-LC (MPEG-2 part 7, MPEG-4
part3, sub-part4 and part 14, MP4 audio).
Advanced Video Coding (AVC) Video compression format, H.264/MPEG-4 part 10.
See the H.264 (MPEG-4 AVC) definition.
Address Resolution Protocol (ARP) A protocol for assigning an IP address to a device
based on the device MAC (Media Access Control) address or physical machine address,
that maintains a table showing the correlation between the two.
B-frames Bi-predictive frames (B-frames) reference video frames before and after the
current frame. They offer significantly better compression than I or P frames, but are not
available in Baseline profile.
Bandwidth A measure of available (or used) data communication resources. The
total range of frequencies or bit rate required to pass a specific signal without significant
distortion or loss of data. The maximum bit rate at a specified error rate, expressed in
bits per second (bps). The device bandwidth should be wider than the highest possible
bandwidth of the signals it could be required to process.
Bit rate The number of bits that are conveyed or processed per unit of time. Bit rate is
quantified using the bits per second (bit / s) unit, often in conjunction with an SI prefix such
as kilo- (kbit / s or kbps), mega- (Mbit / s or Mbps), or giga- (Gbit / s or Gbps).
Codec A hardware device or software program used to encode or decode a digital data
stream or signal. Loosely, a combination of coder-decoder or compressor-decompressor.
Compression Reducing the amount of data required to represent a picture (or a stream
of pictures) and sound before sending or storing it.
Constant Bit Rate (CBR) This scheme adjusts the output bit rate so that it stays very
close to the specified target bit rate.
Constrained Variable Bit Rate (CVBR) This scheme is similar to Variable Bit Rate
(VBR), but sets a maximum allowed bit rate that the encoder cannot exceed.
Data bits The number of bits used to represent one character of data. Data bits can be
7, 8, or 16, but most serial devices use 8 bits for ASCII characters.
DDC Display Data Channel (DDC) is a bi-directional communications standard
developed by VESA ( Video Electronics Standards Association) that defines a universal data
transmission standard for the connectivity between display devices and computers.
Decoder A hardware device or software program used to decompress (decode) or
change a signal from one format to another or convert a digital signal into analog. The
SMD202 is a decoder that converts compatible digital AV streams into a video and audio
HDMI signal or to HDMI AV plus analog audio.
Dynamic Host Configuration Protocol (DHCP) A network protocol that enables
a server to automatically assign unique network addresses (IP address, subnet mask,
gateway) to a device using a defined range of numbers configured for the network.
Domain Name System (DNS) A database system that translates domain names
(such as www.extron.com) into IP addresses.
Dynamic IP address An IP address that is automatically assigned to a client device in a
TCP/IP network, typically by a DHCP server. Network devices that serve multiple user, such
as servers and printers, are usually assigned a static (unchanging) IP address.
SMD202 • Reference Information 166

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results