Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

Command and Response Tables

Basic SIS Commands

Command
ASCII command
(host to device)
Response
(device to host)
Additional Description
Information requests
NOTE: An asterisk (*) after the version number indicates the currently running version. Question marks (?.??) indicate that only
factory firmware is loaded. A caret (^) indicates the firmware version that should be running, but a Mode1 reset (see
SMD202 Reset Summary on page153) was executed and the default factory firmware is running. An exclamation
point (!) indicates corrupted firmware.
Firmware version
Q or 1Q

X1!]

Firmware version to 2 decimal
places (N.nn)
Firmware and build
version
*Q/q

X1!]

Firmware version to 2 decimal
places plus build number to 4
decimal places (N.nn.nnnn)
Verbose version info
0Q Sum of 2Q-3Q-4Q
]
Show bootstrap, factory-
installed, and updated firmware
version.
Bootstrap version
2Q

X1!]

The bootstrap firmware is
not user replaceable but you
may need this information for
troubleshooting.
Factory firmware version
3Q
X1!
plus kernel
version, model
number, and load
date
]
Factory installed firmware is not
user replaceable. This firmware is
the version the SMD202 reverts
to after a mode 1 reset.
Updated firmware version
4Q/4q
X1!
plus kernel
version, model
number, and load
date
]
Use this command to find
out which version of firmware
has been uploaded into the
SMD202.
Query part number
N/n
60-1306-01
]
Query model number
1I
SMD202
]
Query model description
2I
Streaming•Media•Decoder
Query system memory
usage
3I
#Bytes used out of #KBytes
]
View system processor
usage
11I
NN
Returns a percentage of total.
View system processor
idle
12I
NN
Returns a percentage of total.
View eth0 link status
13I
[up/down]*
[10/100/1000]*
[full/half]
Current link state, speed, and
mode.
View telnet connections
E
CC
}
N
]
IccN
]
N=number of active IP
connections.
Verbose mode3.
Set verbose mode

E X2@

CV
}
Vrb

X2@]

View verbose mode
E
CV
}

X2@]

NOTES: X1! = Version number Firmware version number to second decimal place (N.nn)
Version and Build number adds four digits (N.nn.nnnn)
to the Version number
X2@ = Verbose/Response mode 0=clear/none (default for telnet connections)
1=verbose mode (default for RS-232 host control)
2=tagged responses for queries
3=verbose mode and tagged responses for queries
NOTE: If tagged responses is enabled, all read commands return the data, the same as setting the value does
(Example: command: E
CV} Response: Vrb3
]).
136SMD202 • Remote Communication and Control

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results