Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

Host and Device Communications

The SMD202 accepts SIS (Simple Instruction Set) commands through the rear panel
remote RS-232 port, the front panel Configuration port, and the rear panel Ethernet (LAN)
Port. SIS commands consist of one or more characters per command field. They do
not require special characters to begin or end the command character sequence. Each
response to an SIS command ends with a carriage return and a line feed (CR/LF =
]
),
which signals the end of the response character string. A string is one or more characters.

SMD202-initiated Messages

When a local event such as a front panel selection or adjustment takes place, the SMD202
responds by sending a message to the host. No response is required from the host.

Copyright Information

The copyright message is displayed upon connecting to the SMD202 via TCP/IP or Telnet
or after a power cycle via RS-232.
© Copyright 20nn, Extron Electronics, SMD 202, Vn.nn, 60– nnnn-nn
]
Day, DD MMM YYYY HH:MM:SS
]
Vn.nn is the firmware version number.
The SMD202 sends the boot and copyright messages under the following circumstances:
If the SMD202 is off and an RS-232 connection is already set up (the PC is cabled to
the SMD202 and a serial communication program such as HyperTerminal is open), the
connected unit sends these messages via RS-232 when first powered on.
If the SMD202 is on, it sends the boot and copyright messages when a Telnet
connection to the SMD202 is first opened. The day of the week, date, and time are
shown when the SMD202 is connected via Telnet, but not via RS-232. If using a Telnet
connection, the copyright message, date, and time may be followed by a password
prompt.

Password Information

The
]
Password: prompt requires a password (administrator level or user level) followed
by a carriage return. The prompt is repeated if the correct password is not entered. If
the correct password is entered, the unit responds with
]
Login Administrator
]
or
]
Login User
]
, depending on the password entered. If passwords are the same for both
administrator and user, the unit will default to administrator privileges.

Error Responses

When the SMD202 is unable to execute the command, it returns an error response to the
host. The error response codes and their descriptions are as follows:
E10
Unrecognized command
E24
Privilege violation
E12
Invalid port number
E25
Device is not present
E13
Invalid parameter (number is out of
range)
E26
Maximum connections exceeded
E14
Not valid for this configuration
E28
Bad filename or file not found
E17
System timed out
E30
Hardware failure
E22
Busy
E31
Attempt to break port pass-
through when not set
131SMD202 • Remote Communication and Control

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results