Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

Remote

Communication and

Control

This section describes SIS programming and control of the SMD202, including:
Connection Options
LAN (Ethernet) Port
Host and Device Communications
Command and Response Tables

Connection Options

The SMD202 Streaming Media Decoder can be remotely connected via a host computer or
other device (such as a control system) attached to the rear panel RS-232 port or LAN port,
or the front panel USB Config port.
The SMD202 can be configured and controlled using SIS commands or embedded Web
pages. SIS commands can be executed using the Extron DataViewer program, found on
the Extron website.
RS-232 protocol:
9600 baud no parity 1 stop bit
8 data bits no flow control
See RS-232 Port below, for additional details on connecting the RS-232 port.
USB port details:
The Extron USB driver must be installed before use (see Front Panel Configuration Port
on page128).
LAN port defaults:
SMD202 IP address:
192.168.254.254
Gateway IP address:
0.0.0.0
Subnet mask:
255.255.0.0
DHCP:
off
RS-232 Port
The SMD202 has a rear panel serial port (see figure 3,
I
on page 9) that connects to
a host device such as a computer running a HyperTerminal utility, or the Extron DataViewer
utility. The port makes serial control of the player possible. Use the protocol information
listed above to make the connection (see Host and Device Communications on
page131). The port can also be configured as pass-through for direct RS-232 control of a
connected display using serial commands via the network.
SMD202 • Remote Communication and Control 127

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results