Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

HTTP Connection to an SME100

To connect SME100 unicast or multicast push streams over HTTP, use the following
templates.
For unicast streams with no password, the URI format is:
http://<sme100_ip>/web/output1.sdp.
For multicast RTP over UDP RTSP (pull) streams with no credentials set, the URI format is:
http://<sme100_ip>/web/multicast.sdp.
NOTE: A typical IPv4 address for an SME100 device on a private network is
192.168.nnn.nnn or 10.nnn.nnn.nnn). A multicast address is in the range
224.nnn.nnn.nnn to 239.nnn.nnn.nnn.
If the encoder has an active admin password, it challenges the connection. An admin or
user password is required for connection. To play the stream, the user name and password
must be embedded in the URI entered in the Source field.
For unicast or multicast PUSH streams with a password, the URI format is:
http://user:password@<sme100_ip_adr>/web/output1.sdp.
In the following example, connect to a unicast RTSP over UDP stream broadcast from the
SME100 in (see figure 99 on page104), using an admin password “123456”.
1. Locate the HTTP stream in the streams browser (see Player Page Overview on
page22).
2. Drag and drop the stream into the player panel. An error message indicates the stream
load failed. The URI of the stream is shown in the Source: field.
3. Click the ellipsis (...) to open the full file path.
http://admin:123456@192.168.254.254/web/extron.sdp
http:192.168.254.254/web/extron.sdp
4. Add the SME100 user name and password.
http://admin:123456@192.168.254.254/web/extron.sdp
http:192.168.254.254/web/extron.sdp
5. Press <Enter> to load the stream.
The stream loads. If Load Play is active, the stream begins playing. If Load Play is not active,
press play (see Player Controls Features on page23) to start playing the stream.
SMD202 • Advanced Player Configuration 106

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results