Extron SMD 202 manual

Extron SMD 202
9.2 · 1
PDF manual
 · 179 pages
English
manualExtron SMD 202

Push Streaming (Unicast Port Numbers)

In systems with more than one SME 100 encoder using any of the unicast push methods
(TS/UDP, TS/RTP, ES/RTP) to a single SMD202 decoder, each SME 100 must use a unique
port number (such as 60000 and 61000)

Multicast

For systems where streams from one or more SME100s are received and decoded by
multiple SMD202s, multicast addressing is strongly recommended. All network switches
must be suitably rated and correctly configured for IGMP snooping and multicast filtering
with an active IGMP querier (possibly the network switch) available on the local subnet for
optimum performance.

Source Specific Multicast (SSM) IGMP v3

This protocol is an enhancement to conventional Internet Standard Multicast (ISM) which
normally requires a client (decoder) to specify the multicast group address and port number.
Using SSM, the client (decoder) also specifies the IP address of the server (or encoder) from
which it wants to receive the multicast traffic. The additional address information is used by
IGMP v3 capable switches and routers to optimize delivery of the multicast stream from the
server (encoder) to the client (decoder).
NOTE: SSM multicast groups are typically assigned in the range 232.0.0.0 to
232.255.255.255. Contact your system administrator for further details of the
multicast addressing scheme in use on your network.
SSM streams can be accessed in the conventional way using SAP or RTSP protocols. In
this case the information necessary for the connection is supplied via SDP. SSM streams
can also be accessed by entering the appropriate extension to the conventional UDP or
RTP URL.
For example, for multicast group address 232.199.188.177 and port address 10000:
To access a TS/UDP multicast PUSH stream from source IP 192.168.100.201:
udp://232.199.188.177:10000?include_sources=192.168.100.201

Connecting to Streams Without SAP Announcements

For a source that is not configured for SAP announcements (such as IP cameras), the RTSP
(pull) stream URI is entered directly in the Source field of the SMD202 player controls. The
URI prefix (udp in the example below) corresponds to the streaming method.

UDP or RTP Connections

To connect the SMD202 to a stream using the destination port of the encoder, use the
following template:
udp://@:<destination port>
For example, to connect to a SME100 stream, enter the following URI in the SMD202
Source field (see Player Controls Features on page23):
udp://@:60000
The SMD202 also supports the URI formats:
rtp://192.168.254.254@192.168.254.254:60000
and
rtp://@192.168.254.254:60000
SMD202 • Advanced Player Configuration 105

Manual

View the manual for the Extron SMD 202 here, for free. This manual comes under the category digital decoder and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron SMD 202 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron SMD 202 specifications

Below you will find the product specifications and the manual specifications of the Extron SMD 202.

General
BrandExtron
ModelSMD 202 | 60-1306-01
Productdigital decoder
LanguageEnglish
FiletypeUser manual (PDF)
Performance
Channels quantity- channels
Maximum video resolution1920 x 1200 pixels
Network
Ethernet interface typeGigabit Ethernet
Ethernet LAN data rates10,100,1000 Mbit/s
Cabling technology10/100/1000BaseE-T(X)
Ports & interfaces
Number of HDMI outputs1
USB 2.0 ports quantity1
Ethernet LAN (RJ-45) ports1
RS-232 ports1
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (max)15.8 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating relative humidity (H-H)10 - 90 %
Storage temperature (T-T)-40 - 70 °C
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width222 mm
Depth152 mm
Height25 mm
Weight500 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron SMD 202 below.

What is the weight of the Extron SMD 202?

The Extron SMD 202 has a weight of 500 g.

What is the height of the Extron SMD 202?

The Extron SMD 202 has a height of 25 mm.

What is the width of the Extron SMD 202?

The Extron SMD 202 has a width of 222 mm.

What is the depth of the Extron SMD 202?

The Extron SMD 202 has a depth of 152 mm.

Is the manual of the Extron SMD 202 available in English?

Yes, the manual of the Extron SMD 202 is available in English .

Is your question not listed? Ask your question here

No results