Extron RS-232 and IR Control manual

Extron RS-232 and IR Control
7.8 · 1
PDF manual
 · 56 pages
English
manualExtron RS-232 and IR Control

Starting the Configuration Program

To use the MLC to control display devices and switchers, you must create one or more
configurations for it, using the MLC configuration program. A configuration is a set of
specifications for button command assignments and port parameters that enable the
MLC to control your display device or switcher.
NOTE: Configurations can be created away from the job site and without the MLC
being connected to the computer.
After you have downloaded and installed the program (see Downloading and Installing
the Configuration Program on the previous page) and device drivers if necessary (see
Obtaining Device Drivers on page 34), begin by creating a new project.
An MLC project is a file (with an .mlp extension) that contains port and button
configurations for one or more MLCs. A configuration must be created within a new or
existing project. A project can be saved, copied, and edited (for example, by adding or
changing configurations within it). You can also create a configuration and add it to an
existing project. You can start a new project either when first opening the MLC program or
while the program is open and another project is active.
To start the configuration program:
1. Open the MLC 55, 62 and 64 Series Configuration Program by selecting the MLC
icon from the Start menu on your computer desktop. Select:
All Programs\Extron Electronics\MLC 55, 62 and 64\MLC 55, 62 and 64.
The Start Options dialog box opens in front of the MLC 55, 62 and 64 Series
Configuration Program main window.
2. On the Start Options dialog box, select the Create a New Project radio button.
Figure 30. Start Options Dialog Box
3. Click OK. The Add Device dialog box opens, displaying a diagram of your MLC front
panel.
4. In the Add Device dialog box, enter a name for your MLC in the Device Name field.
This becomes the name of the first configuration in the new project.
MLC 55 Series MediaLink Controllers • Software-based Configuration 31

Manual

View the manual for the Extron RS-232 and IR Control here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Extron RS-232 and IR Control or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron RS-232 and IR Control specifications

Below you will find the product specifications and the manual specifications of the Extron RS-232 and IR Control.

General
BrandExtron
ModelRS-232 and IR Control | 60-1390-03
Productremote controller
EAN5712505902448
LanguageEnglish
FiletypeUser manual (PDF)
Design
InterfaceIR Wireless/Wired
Product colorWhite
Remote control proper useAV switch
Input typePress buttons
Backlight buttonsYes
Display
Built-in displayNo
Performance
Number of devices supported-
Maximum range- m
Battery
RechargeableNo
Built-in batteryNo
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (transmitter) (max)1.1 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating temperature (T-T)32 - 122 °F
Storage temperature (T-T)-40 - 70 °C
Storage temperature (T-T)-40 - 158 °F
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width44.7 mm
Depth35.8 mm
Height71.4 mm
Weight100 g
Packaging data
Package width187 mm
Package depth264 mm
Package height76 mm
Package weight790 g
Logistics data
Harmonized System (HS) code85299097
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron RS-232 and IR Control below.

What is the weight of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a weight of 100 g.

A battery in my remote controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a height of 71.4 mm.

What is the width of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a width of 44.7 mm.

What is the depth of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a depth of 35.8 mm.

Is the manual of the Extron RS-232 and IR Control available in English?

Yes, the manual of the Extron RS-232 and IR Control is available in English .

Is your question not listed? Ask your question here

No results