Extron RS-232 and IR Control manual

Extron RS-232 and IR Control
7.8 · 1
PDF manual
 · 56 pages
English
manualExtron RS-232 and IR Control

Software-based

Configuration

This section describes basic procedures for setting up the MLC using the MLC 55, 62
and 64 Series Configuration Program. The following topics are covered:
About the MLC 55, 62 and 64 Configuration Program
Computer System Requirements
Downloading and Installing the Configuration Program
Starting the Configuration Program
Obtaining Device Drivers
For more detailed descriptions and additional configuration procedures, see the
configuration program help file.

About the MLC 55, 62 and 64 Configuration Program

An MLC controller must be configured in order for it to be able to control other devices.
The Extron MLC 55, 62 and 64 Series Configuration Program is used to set up the MLC
front panel buttons and rear panel ports and to update firmware. Using this program, you
can create configurations on your computer for your MLC and then upload them to the MLC
via the front panel USB port. (The MLC does not have to be connected to the computer
while you are creating the configurations.) See Installation and Operation, beginning
on page 5, for pin assignments and other details on the configuration ports. See the
configuration program help file to create and upload the configurations.

Computer System Requirements

The minimum system requirements for the computer on which you install the MLC
configuration program include:
Processor: Intel Pentium III processor (1 GHz).
Operating System:
Windows 8.1
Windows 7 (64 bit)
Microsoft.NET Framework 4.0
Hard Disk: 50 MB available
RAM: 512 MB
Display: 1280x768 minimum resolution. Graphics hardware acceleration requires a
DirectX 10 graphics card.
MLC 55 Series MediaLink Controllers • Software-based Configuration 28

Manual

View the manual for the Extron RS-232 and IR Control here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Extron RS-232 and IR Control or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron RS-232 and IR Control specifications

Below you will find the product specifications and the manual specifications of the Extron RS-232 and IR Control.

General
BrandExtron
ModelRS-232 and IR Control | 60-1390-03
Productremote controller
EAN5712505902448
LanguageEnglish
FiletypeUser manual (PDF)
Design
InterfaceIR Wireless/Wired
Product colorWhite
Remote control proper useAV switch
Input typePress buttons
Backlight buttonsYes
Display
Built-in displayNo
Performance
Number of devices supported-
Maximum range- m
Battery
RechargeableNo
Built-in batteryNo
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (transmitter) (max)1.1 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating temperature (T-T)32 - 122 °F
Storage temperature (T-T)-40 - 70 °C
Storage temperature (T-T)-40 - 158 °F
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width44.7 mm
Depth35.8 mm
Height71.4 mm
Weight100 g
Packaging data
Package width187 mm
Package depth264 mm
Package height76 mm
Package weight790 g
Logistics data
Harmonized System (HS) code85299097
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron RS-232 and IR Control below.

What is the weight of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a weight of 100 g.

A battery in my remote controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a height of 71.4 mm.

What is the width of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a width of 44.7 mm.

What is the depth of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a depth of 35.8 mm.

Is the manual of the Extron RS-232 and IR Control available in English?

Yes, the manual of the Extron RS-232 and IR Control is available in English .

Is your question not listed? Ask your question here

No results