Extron RS-232 and IR Control manual

Extron RS-232 and IR Control
7.8 · 1
PDF manual
 · 56 pages
English
manualExtron RS-232 and IR Control
7. Attach the unit to the mud ring using the provided screws in the holes at the top and
bottom.
8. If desired, connect the USB cable from your computer to the front panel Config port
and configure the system using the configuration program or SIS commands.
9. Place the faceplate onto the unit so that the magnets hold it securely in place.
10. When ready to operate, connect power to all devices.

Mounting the MLC 55 RS EU or MLC 55 RS EU V in a Raceway

When you mount an EU junction box in a cable raceway,
the junction box is sometimes recessed slightly into the
raceway. In order to mount an MLC 55 RS EU or
MLC RS EU V to the junction box, you must place a
spacer (provided) between the rim of the junction box and
the metal mounting plate of the MLC to fill in the gap
between them and bring the metal plate flush with the
edges of the raceway (see the illustration at right).
Euro Channel
Race
way
Faceplate
MLC 55 RS EU
Junction Box
E
E
OFF
ON
VIDEO
VOL
PC
VOL
E
DISPLAY
Spacer
Figure 25. Mounting an MLC 55 RS EU in a Raceway
To mount the MLC 55 RS EU or EU V in the raceway with the spacer:
1. Mount a two-gang EU junction box in the raceway.
2. Pull all cables through the junction box and spacer.
3. Disconnect power from all devices at the source and connect all cables to the MLC.
4. With the MLC front panel facing toward you, place the metal mounting plate of
the MLC onto the spacer so that the screw heads pass through the slotted holes
(keyholes) in the mounting plate. Tighten the screws to secure the metal mounting
plate to the spacer and junction box.
5. If desired, connect the USB cable from your computer to the front panel Config port
and configure the system using the MLC 55, 62 and 64 Configuration Program or SIS
commands.
6. Place the faceplate onto the MLC metal mounting plate, making sure that the four
magnets are holding it securely.
Junction Box
MLC Metal
Mounting Plate
Spacer
Raceway
MLC 55 Series MediaLink Controllers • Installation and Operation 25

Manual

View the manual for the Extron RS-232 and IR Control here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Extron RS-232 and IR Control or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron RS-232 and IR Control specifications

Below you will find the product specifications and the manual specifications of the Extron RS-232 and IR Control.

General
BrandExtron
ModelRS-232 and IR Control | 60-1390-03
Productremote controller
EAN5712505902448
LanguageEnglish
FiletypeUser manual (PDF)
Design
InterfaceIR Wireless/Wired
Product colorWhite
Remote control proper useAV switch
Input typePress buttons
Backlight buttonsYes
Display
Built-in displayNo
Performance
Number of devices supported-
Maximum range- m
Battery
RechargeableNo
Built-in batteryNo
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (transmitter) (max)1.1 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating temperature (T-T)32 - 122 °F
Storage temperature (T-T)-40 - 70 °C
Storage temperature (T-T)-40 - 158 °F
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width44.7 mm
Depth35.8 mm
Height71.4 mm
Weight100 g
Packaging data
Package width187 mm
Package depth264 mm
Package height76 mm
Package weight790 g
Logistics data
Harmonized System (HS) code85299097
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron RS-232 and IR Control below.

What is the weight of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a weight of 100 g.

A battery in my remote controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a height of 71.4 mm.

What is the width of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a width of 44.7 mm.

What is the depth of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a depth of 35.8 mm.

Is the manual of the Extron RS-232 and IR Control available in English?

Yes, the manual of the Extron RS-232 and IR Control is available in English .

Is your question not listed? Ask your question here

No results