Extron RS-232 and IR Control manual

Extron RS-232 and IR Control
7.8 · 1
PDF manual
 · 56 pages
English
manualExtron RS-232 and IR Control
J
Mute button (MLC 55 RS VC only) — By default, this button is in Toggle mode on
the MLC 55 RS VC to mute and unmute the volume on a connected Extron amplifier
with remote volume port capability. It is also configured to light red when active (see
the MLC 55, 62 and 64 Series Configuration Program help file for more information on
toggle switch mode and to program button lighting).

Buttons

The front panel button illumination provides status information about what the MLC is
doing. The buttons are lit brightly or dimly while the MLC has power. When a button has
been pressed and is active or on, it lights brightly. While a button is inactive or off, it is lit
dimly. In addition, using the MLC 55, 62 and 64 Configuration Program you can configure
any button to light red when it is active. When buttons are grouped together, only the
button that is pressed lights brightly. The other buttons in the group remain dim.
You can remove and replace the labels on these buttons, then use the configuration
program to add functions to them that their new labels represent.
The buttons can also be set up to perform a sequence of several functions, which can be
combinations of the following options:
A driver operation — Execute an RS-232 or IR control command that is part of a
device driver (for a projector, VCR, DVD player, switcher, and so forth).
Setting a time delay — Insert delays between executed commands.
Setting the button lighting behavior — Specify fast or slow blinking of a front
panel button when it is pressed. You can also configure a button to light red.
A user-defined RS-232 operation — Issue a non-driver-associated RS-232
command (one that you programmed separately), such as an SIS command, via the
IR/S or the RS-232 port.
Button emulation — Initiate a series of button functions with a single button press.
NOTE: While the MLC is executing a configured command, all other front panel
buttons are disabled.
See the MLC 55, 62 and 64 Series Configuration Program help file for detailed procedures
for configuring the buttons. See Downloading and Installing the Configuration
Program on page 29 to obtain the program.
MLC 55 Series MediaLink Controllers • Installation and Operation 10

Manual

View the manual for the Extron RS-232 and IR Control here, for free. This manual comes under the category remote controllers and has been rated by 1 people with an average of a 7.8. This manual is available in the following languages: English. Do you have a question about the Extron RS-232 and IR Control or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron RS-232 and IR Control specifications

Below you will find the product specifications and the manual specifications of the Extron RS-232 and IR Control.

General
BrandExtron
ModelRS-232 and IR Control | 60-1390-03
Productremote controller
EAN5712505902448
LanguageEnglish
FiletypeUser manual (PDF)
Design
InterfaceIR Wireless/Wired
Product colorWhite
Remote control proper useAV switch
Input typePress buttons
Backlight buttonsYes
Display
Built-in displayNo
Performance
Number of devices supported-
Maximum range- m
Battery
RechargeableNo
Built-in batteryNo
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (transmitter) (max)1.1 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Operating temperature (T-T)32 - 122 °F
Storage temperature (T-T)-40 - 70 °C
Storage temperature (T-T)-40 - 158 °F
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width44.7 mm
Depth35.8 mm
Height71.4 mm
Weight100 g
Packaging data
Package width187 mm
Package depth264 mm
Package height76 mm
Package weight790 g
Logistics data
Harmonized System (HS) code85299097
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron RS-232 and IR Control below.

What is the weight of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a weight of 100 g.

A battery in my remote controller has started to corrode. Is the device still safe to use?

The product can still be used safely after proper cleaning. Remove the battery with gloves and clean the battery compartment with a toothbrush and vinegar. After drying, new batteries can be inserted into the device.

What is the height of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a height of 71.4 mm.

What is the width of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a width of 44.7 mm.

What is the depth of the Extron RS-232 and IR Control?

The Extron RS-232 and IR Control has a depth of 35.8 mm.

Is the manual of the Extron RS-232 and IR Control available in English?

Yes, the manual of the Extron RS-232 and IR Control is available in English .

Is your question not listed? Ask your question here

No results