Extron Retractor SM VGA manual

Extron Retractor SM VGA
8.5 · 1
PDF manual
 · 6 pages
English
manualExtron Retractor SM VGA
6
68-2663-51 Rev. A02 18
© 2018 Extron Electronics — All rights reserved. www.extron.com
All trademarks mentioned are the property of their respective owners.

Speed Control Adjustment

The Retractor SM module is delivered with the speed control adjusted for nominal operation in all mounting orientations (vertical,
horizontal, and angular), however, speed control adjustment may be required in your application.
Speed
Control

NOTES:

Ensure the speed control knob remains fully seated, with the teeth of the knob engaged throughout adjustments.
Retraction speed is affected by the installation orientation (vertical, horizontal, or angular). Always test speed
adjustments with the Retractor in its installed position.
The speed control adjusts the cable retraction speed:
If the retraction is too fast, turn the speed control a quarter‑turn clockwise (the control clicks as it turns) to slow the cable
retraction. Test the speed after each quarter‑turn until the desired speed is reached.
If the retraction is too slow after the nal quarter‑turn, turn the knob counterclockwise one click at a time, retesting after
each click, until the desired speed is reached.
If the cable retraction is too slow, adjust the speed control counterclockwise in the same manner.

Retractor Operation

When initial adjustments are complete, the Retractor is ready for operation. To connect a cable, grasp the connector and pull
enough cable from the Retractor to connect it to the device. There is no need to press the cable release button. When you stop
pulling the cable, the Retractor xes the length automatically.
To retract the cable, grasp the connector to control the cable, press and hold the cable release button until the Share button is
seated on the cable release assembly.

Quick Installation Checklist

Planning (page 1)

If this is a new installation, refer to the enclosure Installation Guide.
Ensure there is adequate space available under the enclosure for the Retractor SM Modules.

Choose the Retractor orientation.

Obtain optional mounting brackets and accessories necessary for the application (see Required Tools and
Additional Accessories on page1).

Prepare the Retractors (page 3)

To mount the Retractors horizontally or at an angle, remove the two Retractor enclosure screws.
For angular installations, reinstall the enclosure screws in the angular mounting holes.

Prepare the Enclosure (page 3)

Disconnect all power to the enclosure.

Refer to the instructions included with the individual mounting brackets for installation.

Install the Retractors (page 4)

Connect all retraction system cables and other cables.

Tighten the locking screws (see Locking Screw on the previous page).

Initial Adjustments and Operation (page 5 and page 6)

Verify proper operation of each Retractor SM module. Adjust tension or speed control as necessary.
After the initial adjustments, the Retractor system is ready for normal operation.

Manual

View the manual for the Extron Retractor SM VGA here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.5. This manual is available in the following languages: English. Do you have a question about the Extron Retractor SM VGA or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron Retractor SM VGA specifications

Below you will find the product specifications and the manual specifications of the Extron Retractor SM VGA.

General
BrandExtron
ModelRetractor SM VGA | 70-1065-15
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeCable holder
Purpose-
Product colorBlack
Packaging content
Quantity per pack1 pc(s)
Weight & dimensions
Width30 mm
Depth684 mm
Height109 mm
Weight1600 g
Packaging data
Package width778 mm
Package depth156 mm
Package height64 mm
Package weight1950 g
Logistics data
Harmonized System (HS) code85389099
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron Retractor SM VGA below.

What is the weight of the Extron Retractor SM VGA?

The Extron Retractor SM VGA has a weight of 1600 g.

What is the height of the Extron Retractor SM VGA?

The Extron Retractor SM VGA has a height of 109 mm.

What is the width of the Extron Retractor SM VGA?

The Extron Retractor SM VGA has a width of 30 mm.

What is the depth of the Extron Retractor SM VGA?

The Extron Retractor SM VGA has a depth of 684 mm.

Is the manual of the Extron Retractor SM VGA available in English?

Yes, the manual of the Extron Retractor SM VGA is available in English .

Is your question not listed? Ask your question here

No results