Extron PowerCage FOX Tx HDMI MM manual

Extron PowerCage FOX Tx HDMI MM
6.6 · 1
PDF manual
 · 49 pages
English
manualExtron PowerCage FOX Tx HDMI MM

Advanced tab functions

Click the Advanced tab to access the functions described below.
NOTE: The Advanced functions are available only if your computer is connected to the
receiver.

Advanced Configuration area

Link 2 and Daisy Chain radio buttons
Select among the Enable Link 2,
Disable Link 2, and
Enable Daisy Chain radio buttons to
define the function of the receiver Tx LC
connector; either:
Routing RS-232 over fiber to the transmitter
No function
Routing the signal received on the Rx LC connector to the next receiver in a daisy chain.
NOTE: The disable return link function is primarily used and recommended when the
transmitting device is a FOX 500 DA6 and the receiver is connected to any of
outputs 2 through 6 on the DA.
Auto Memory radio buttons — Select the Auto Memory radio button to automatically
apply saved position settings when the sensed input resolution changes.
Test Patterns drop box — Select one of three built-in test patterns; Colorbars,
Grayscale, and Alternating Pixels; as necessary to help adjust the color,
brightness and contrast, and focus of the display. Select Off to output the video that is
input to the transmitter.
NOTES: You must have a video input connected, the transmitter-Tx-to-receiver-Rx
fiber cable connected, and the receiver cannot be in daisy-chain mode for the
receiver to output a selected test pattern.
The test pattern turns off if the input signal rate is changed or disconnected
or if power is removed.
PowerCage FOX HDMI • Remote Control 32

Manual

View the manual for the Extron PowerCage FOX Tx HDMI MM here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Extron PowerCage FOX Tx HDMI MM or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron PowerCage FOX Tx HDMI MM specifications

Below you will find the product specifications and the manual specifications of the Extron PowerCage FOX Tx HDMI MM.

General
BrandExtron
ModelPowerCage FOX Tx HDMI MM | 70-889-11
ProductAV extender
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAV transmitter
Maximum resolution4096 x 2160 pixels
Maximum refresh rate60 Hz
Bandwidth4.95 Gbit/s
Power
Power consumption (typical)6.02 W
AC input voltage12 V
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Ports & interfaces
HDMI in1
3.5 mm (1/8-inch) inYes
RS-232 input ports2
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron PowerCage FOX Tx HDMI MM below.

Is the manual of the Extron PowerCage FOX Tx HDMI MM available in English?

Yes, the manual of the Extron PowerCage FOX Tx HDMI MM is available in English .

Is your question not listed? Ask your question here

No results