Extron PowerCage FOX Tx HDMI MM manual

Extron PowerCage FOX Tx HDMI MM
6.6 · 1
PDF manual
 · 49 pages
English
manualExtron PowerCage FOX Tx HDMI MM

Remote Control

This section describes the remote control operation of the PowerCage FOX HDMI, including:
Serial Ports
Simple Instruction Set Control
FOX Extenders Control Program

Serial Ports

The transmitter and receiver boards each have an RS-232 serial port on a 3 pins of a 5-pin
captive screw connector that can be connected to a host device (see item
d
on page 6).
The PowerCage enclosure has a Configuration port, a 2.5 mm mini stereo jack, that parallels
the board ports (see item
e
on page 15).
These serial ports make serial control of the transmitter and receiver possible, using devices
such as a computer running the Extron DataViewer or MicroSoft HyperTerminal utility or a
control system.
The protocol for all ports is as follows:
9600 baud no parity 8 data bits
1 stop bit no ow control
NOTES: For each unit, the Remote RS-232 port is active only if the PowerCage
Configuration port is not active. If an active Configuration port connection is
made, the Remote RS-232 port for that board becomes inactive.
RS-232 commands and Windows-based control program functions are
transmitter- or receiver-specific or may have different responses depending
on the unit connected. You must connect to the appropriate device for the
command or function to work properly or to get the expected response.
PowerCage FOX HDMI • Remote Control 17

Manual

View the manual for the Extron PowerCage FOX Tx HDMI MM here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Extron PowerCage FOX Tx HDMI MM or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron PowerCage FOX Tx HDMI MM specifications

Below you will find the product specifications and the manual specifications of the Extron PowerCage FOX Tx HDMI MM.

General
BrandExtron
ModelPowerCage FOX Tx HDMI MM | 70-889-11
ProductAV extender
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAV transmitter
Maximum resolution4096 x 2160 pixels
Maximum refresh rate60 Hz
Bandwidth4.95 Gbit/s
Power
Power consumption (typical)6.02 W
AC input voltage12 V
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Ports & interfaces
HDMI in1
3.5 mm (1/8-inch) inYes
RS-232 input ports2
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron PowerCage FOX Tx HDMI MM below.

Is the manual of the Extron PowerCage FOX Tx HDMI MM available in English?

Yes, the manual of the Extron PowerCage FOX Tx HDMI MM is available in English .

Is your question not listed? Ask your question here

No results