Extron PowerCage FOX Tx HDMI MM manual

Extron PowerCage FOX Tx HDMI MM
6.6 · 1
PDF manual
 · 49 pages
English
manualExtron PowerCage FOX Tx HDMI MM

Making Connections

HDMI connectors

Figure 6 denes the pinout for the HDMI protocol.

Pin Signal
1
TMDS data 2+
TMDS data 2-
TMDS data 0–
TMDS clock- +5 V power
Hot plug detect
CEC control
Reserved
(NC)
TMDS data 1+ TMDS clock+
TMDS clock
shield
SDA
DDC / CEC
Ground
TMDS data 2
shield
Pin Pin Signal Signal
2
71
3
41
01
6
11 17
12 18
19
14
3
TMDS data 0-
TMDS data 0
shield
8
9
SCL
15
TMDS data 1-
TMDS data 1
shield
5
6
HDMI
HDMI
Type A Receptacle
Type A Plug
1
18 2
19
1
182
19

Figure 6. HDMI Connector

HDMI signals run at a very high frequency and are especially prone to errors caused by bad

video connections, too many adapters, or excessive cable length. To avoid the loss of an

image or jitter, follow these guidelines:

Do not exceed 16.4 feet (5 meters) on the input of the PowerCage FOX HDMI

transmitter or the output of the PowerCage FOX HDMI receiver.

Use only the cable designed for HDMI signals that is supplied by Extron.

Limit or avoid the use of adapters.

Use only cables specically intended for HDMI or DVI signals. Use of non-HDMI or

non-DVI cables or modied cables can result in a missing video output.

To securely fasten an HDMI cable to a device:

1. Plug the HDMI cable into the panel connection (see

a

in figure 7).

3
3
1
2
4
5

Figure 7. Installing the LockIt Lacing Bracket

2. Loosen the HDMI connection mounting screw from the panel enough to allow the

LockIt lacing bracket to be placed over it (

b

). The screw does not have to be removed.

PowerCage FOX HDMI • Installation and Operation 10

Manual

View the manual for the Extron PowerCage FOX Tx HDMI MM here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 6.6. This manual is available in the following languages: English. Do you have a question about the Extron PowerCage FOX Tx HDMI MM or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron PowerCage FOX Tx HDMI MM specifications

Below you will find the product specifications and the manual specifications of the Extron PowerCage FOX Tx HDMI MM.

General
BrandExtron
ModelPowerCage FOX Tx HDMI MM | 70-889-11
ProductAV extender
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAV transmitter
Maximum resolution4096 x 2160 pixels
Maximum refresh rate60 Hz
Bandwidth4.95 Gbit/s
Power
Power consumption (typical)6.02 W
AC input voltage12 V
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Ports & interfaces
HDMI in1
3.5 mm (1/8-inch) inYes
RS-232 input ports2
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron PowerCage FOX Tx HDMI MM below.

Is the manual of the Extron PowerCage FOX Tx HDMI MM available in English?

Yes, the manual of the Extron PowerCage FOX Tx HDMI MM is available in English .

Is your question not listed? Ask your question here

No results