Extron P/2 DA12 manual

Extron P/2 DA12
7 · 1
PDF manual
 · 32 pages
English
manualExtron P/2 DA12
P/2 DA8 and P/2 DA12 • Installation and Operation

Installation and Operation

2-2

Installation Overview

The distribution amplifiers can be mounted on tabletops, in
racks and under furniture. Through-desk mounting is not
recommended for these products. To install these units, follow
these steps:
1. Turn off all electrical equipment. Make sure that the input
sources, the distribution amplifier, and the output displays
are all turned off, disconnected from their power sources,
and connecting cables have been removed.
2. Mount the unit (see "Mounting the Distribution
Amplifier" below).
3. Connect the Cables (see "Operation" on pages 2-8 to 2-12).
4. Plug in the power supply and turn on the display devices
and input devices.

Mounting the Distribution Amplifier

The 1 U, full rack size of these distribution amplifiers allows
them to be mounted on a tabletop, on racks, or under furniture.

Tabletop placement

Attach the four included rubber feet to the bottom of the unit
and place it in any convenient location.

Rack Mounting

UL requirements for rack mounting
The following Underwriters Laboratories (UL) concerns are
relevant to the safe installation of these distribution amplifiers in
a rack:
1. Elevated operating ambient temperature — If the unit
is installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore,
install the equipment in an environment compatible with
the maximum ambient temperature (Tma: +122 °F, +50 ° C)
specified by Extron.
2. Reduced air flow — Install the equipment in the rack
so that the equipment gets adequate air flow for safe
operation.
3. Mechanical loading — Mount the equipment in the rack
so that uneven mechanical loading does not create a
hazardous condition.
4. Circuit overloading — Connect the equipment to
the supply circuit and consider the effect that circuit

Manual

View the manual for the Extron P/2 DA12 here, for free. This manual comes under the category receivers and has been rated by 1 people with an average of a 7. This manual is available in the following languages: English. Do you have a question about the Extron P/2 DA12 or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron P/2 DA12 specifications

Below you will find the product specifications and the manual specifications of the Extron P/2 DA12.

General
BrandExtron
ModelP/2 DA12 | 60-893-02
Productreceiver
LanguageEnglish
FiletypeUser manual (PDF)
Inputs
VGA (D-Sub) input ports1
Outputs
VGA (D-Sub) output ports12
Technical details
Bandwidth350 MHz
Product colorGray
Gain6 dB
Total Harmonic Distortion (THD)0.03 %
Signal-to-Noise Ratio (SNR)90 dB
Power
Input voltage100 - 240 V
AC input frequency50 - 60 Hz
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth216 mm
Height41 mm
Weight2700 g
Package width337 mm
Package depth514 mm
Package height133 mm
Package weight2870 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron P/2 DA12 below.

When is my volume too loud?

A volume above 80 decibels can be harmful to hearing. When the volume exceeds 120 decibels, direct damage can even occur. The chance of hearing damage depends on the listening frequency and duration.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

What is HDMI?

HDMI stands for High-Definition Multimedia Interface. An HDMI cable is used to transport audio and video signals between devices.

How can I best clean my receiver?

A slightly damp cleaning cloth or soft, dust-free cloth works best to remove fingerprints. Dust in hard-to-reach places is best removed with compressed air.

Wat is Dolby Atmos?

Dolby Atmos is a technology that ensures that the sound is reflected from the ceiling to where you are listening. This makes it possible to create a 5.1 effect with only 1 speaker.

What is the weight of the Extron P/2 DA12?

The Extron P/2 DA12 has a weight of 2700 g.

What is the height of the Extron P/2 DA12?

The Extron P/2 DA12 has a height of 41 mm.

What is the width of the Extron P/2 DA12?

The Extron P/2 DA12 has a width of 442 mm.

What is the depth of the Extron P/2 DA12?

The Extron P/2 DA12 has a depth of 216 mm.

Is the manual of the Extron P/2 DA12 available in English?

Yes, the manual of the Extron P/2 DA12 is available in English .

Is your question not listed? Ask your question here

No results