Extron JMP 9600 HD manual

Extron JMP 9600 HD
9.2 · 1
PDF manual
 · 122 pages
English
manualExtron JMP 9600 HD

Connections for Synchronized Multi-player Operation

The following equipment is required for an example of a small synchronized system:

Two JMP 9600 Media Players (see figure 67, below)

One or more LTC cables terminated with male RCA connectors (in red on figure 67)

One or more Lock (ESGEN or MSGEN genlock) cables terminated with 6-pin mini-DIN

connectors (shown in blue on figure 67)

A computer that is running show control software

Ethernet or serial (RS-232) remote control cabling

A synchronized system requires that one device in the system is configured as the master

device which generates the timing references for the entire system. All other devices in the

system are configured as slaves.

The JMP 9600 can either generate a master timing references or operate as a slave. For

the purposes of this discussion, assume that one of the media players is configured as the

master. The media player can also present some clips in master mode and others in slave

mode.

The slave player must be set to Chase mode (see “Video submenu“ to set the mode from

the front panel) to continuously lock to the master player. In trigger mode, the slave player

starts playback at the predefined Playat time and free runs after that.

NOTE: The two media players in this example are designated as the “master player”

and “slave player” for the remainder of this discussion.

The master player distributes LTC and proprietary genlock (if configured) to all other devices

in the system that need it (slaves). Typically, a slave generates its output based on the timing

references it receives. For example a lighting system can be programmed based on the LTC it

receives to generate a lighting scene or effect when a certain timecode is received.

The master player outputs LTC on its LTC Out connector (see figure 67). The slave player

receives LTC on its LTC In connector and syncs itself to the master player. If the master player

outputs a timecode of one minute and 28 seconds (expressed as 00:01:28:00), the slave

device follows it there. If the master player is playing a presentation or has a presentation

cued and has received the TcStart MSVPP command, the LTC counts up from the initial

command. If the master player is paused, the LTC repeats the same value. The active or

static LTC value can be seen as the TC field on the front panel Channel Status screen (see

Channel status menus”).

In an application where other components in the system need LTC, the slave player outputs

the signal on its LTC Out connector.

Master Player Slave Player
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
INPUT: 100-240VA C, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
DIGITAL VIDEO OUTPUTS
21
DVI-I-1DVI-I-2
HDSDI
JMP 9600
GENLOCK
LOCK LTC
IN
OUT
OUT
IN
REMOTE 2
NC CNCNCNO NC CCCNONONO
DIGITAL INPUTS RELAY OUTPUTS
12 34
+ -+ -+ -+ -
12V
POWER
R1 R3 R4R2
1-2 3-4 5-6 7-8
DIGITAL
AUDIO
OUT
9-10 11-12 13-14 15-16
1 LAN 2
REMOTE 1
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
INPUT: 100-240VAC, 0.4-1A, 50/60HZ
USE ONLY: F2 AH 240V FUSES.
DIGITAL VIDEO OUTPUTS
21
DVI-I-1DVI-I-2
HDSDI
JMP 9600
GENLOCK
LOCK LTC
IN
OUT
OUT
IN
REMOTE 2
NC CNCNCNO NC CCCNONONO
DIGITAL INPUTS RELAY OUTPUTS
12 34
+ -+ -+ -+ -
12V
POWER
R1 R3 R4R2
1-2 3-4 5-6 7-8
DIGITAL
AUDIO
OUT
9-10 11-12 13-14 15-16
1 LAN 2
REMOTE 1

Figure 67. Sample Connections for System Synchronization

NOTE: In another application, external show control equipment could provide the LTC

reference. In such an application, both media players are slaved to the show

control equipment.

JMP 9600 Media Player • Detailed System Interaction 84

Manual

View the manual for the Extron JMP 9600 HD here, for free. This manual comes under the category media players and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron JMP 9600 HD or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron JMP 9600 HD specifications

Below you will find the product specifications and the manual specifications of the Extron JMP 9600 HD.

General
BrandExtron
ModelJMP 9600 HD | 60-1135-01
Productmedia player
LanguageEnglish
FiletypeUser manual (PDF)
Storage
Built-in storage mediaNo
Storage media typeNot available
Total storage capacity0 GB
Features
Video formats supported-
Image formats supported-
Supported radio bandsNot supported
Product colorBlack
Video
Full HDYes
Maximum video resolution2048 x 1080 pixels
HD typeFull HD
Audio
Audio output channels- channels
Impedance75 Ω
Ports & interfaces
HDMI ports quantity0
HDCP-
Ethernet LAN (RJ-45) ports2
USB 2.0 ports quantity0
Audio (L/R) out0
Component video (YPbPr/YCbCr) out0
Composite video out0
DVI-I ports quantity2
Digital audio optical out0
Digital audio coaxial out0
S/PDIF out portYes
S-Video outputs quantity1
Network
Ethernet LANYes
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
Display
Built-in displayYes
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)70 W
Operational conditions
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight & dimensions
Width432 mm
Depth394 mm
Height89 mm
Weight10400 g
Packaging data
Package width525 mm
Package depth648 mm
Package height225 mm
Package weight14290 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron JMP 9600 HD below.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the weight of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a weight of 10400 g.

What is the height of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a height of 89 mm.

What is the width of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a width of 432 mm.

What is the depth of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a depth of 394 mm.

Is the manual of the Extron JMP 9600 HD available in English?

Yes, the manual of the Extron JMP 9600 HD is available in English .

Is your question not listed? Ask your question here

No results