Extron JMP 9600 HD manual

Extron JMP 9600 HD
9.2 · 1
PDF manual
 · 122 pages
English
manualExtron JMP 9600 HD

Using the Command and Response Table

Symbols (parameters), defined below, are used throughout the Command and Response
Table for MSVPP Commands, which begins on page 60. The symbols represent variables
in the command/response table fields. Letters in the command field are not case-sensitive.
Hexadecimal equivalent are not necessary for the MSVPP command set, with the possible
exception of the carriage return character (0x0D) and the line return chararacter (0x0A).

Symbol Definitions

] = CR/LF (carriage return/line feed)

} = Carriage return (no line feed)

= Space (hard) character

X! = Folder name Name of a DCP folder (such as “

720p_422_60_donkey
“)

X@ = Clip name Name of a clip file (such as “

rafting_720p_5994.cpl.xml
“)

X# = Output (channel) 1 = channel 1 2 = channel 2 1,2 = both channels

X$ = Playlist name Name of a playlist file (such as “Canyon documentary.espl.xml”)

NOTE: For the clip name (
X@
) and playlist name (
X$
), the name that you enter must include the file extension (“cpl.xml” for a clip or
“espl.xml” for a playlist) to be valid. If you try to enter a name without the file extension, the media player responds with ERROR.

X% = Playlist position Sequential postion of a clip in a playlist

X^ = Play speed Speed at which to play video, where:

1.0 is normal speed, 2.0 is 2x normal speed, and so on
A positive value (+) is forward video (+ is assumed if no direction is specified)
A negative value (–) is reverse video
Fractional speeds are rounded up or down to the 3rd decimal place (0.000)
X& = Frame count for advance command Number of video frames to jump forward or backward, where:
A positive value (+) is forward (+ is assumed if no direction is specified)
A negative value (–) is reverse
X* = Frame count for seek and assorted timecode commands nn:nn:nn:nn (“hour”:”minute”:”second”:”frame”)
X( = Property name “PlayAt“, “StartTime“, “StopTime“, or “TimecodeMode”
NOTE: All names, file names, clip names, and property names, are case sensitive.
X1) = Playlist property value If
X(
= “TimecodeMode“:
X1)
= “Disabled“, “Generate“, or “Receive”
If
X(
= “PlayAt“, “StartTime“,
or “StopTime“:
X1)
= nn:nn:nn:nn (hours:minutes:seconds:frame)
If
X(
= “Path“:
X1)
= the path to the playlist file (an empty character if the file is in the
root playlist folder)
X1! = Timecode mode “timecodeGenerate“ or “timecodeReceive”
X1@ = Timecode receive mode setting “chase“ or “trigger”
X1# = On/off (audio mute, loop, input trigger) 0 = off or 1 = on
X1$ = Video mode “1_channel”, “2_channel”, or “2_channel_locked”
X1% = Video output video.hdsdi = HD-SDI output video (channel 1 and channel 2)
ch1.video.dac = channel 1 analog video
ch1.video.dvi = channel 1 digital video
ch2.video.dac = channel 2 analog video
ch2.video.dvi = channel 2 digital video

X1^ = Colorspace

“rgb” or “yprpb•bt.709”
X1& = Color value 000 (none) through 255 (maximum)

X1* = Alpha blend 000 through 255

X1( = Time 0.00 (seconds) though 255.0
X2) = Genlock mode “master“, “esgen“, “esgenlegacy“, “blackburst_ntsc“, “blackburst_pal“,
or“trisynch“
NOTE: “esgen“ is sync slaved to the proprietary Electrosonic ESGen sync.
“esgen_legacy“ is sync slaved to the proprietary Electrosonic ESGen sync (native to older products, such as the MS9200).
“master“ is ESGEN sync output as a master.
“trisynch” is HDTV tri-level sync.
JMP 9600 Media Player • Programming Guide 58

Manual

View the manual for the Extron JMP 9600 HD here, for free. This manual comes under the category media players and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron JMP 9600 HD or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron JMP 9600 HD specifications

Below you will find the product specifications and the manual specifications of the Extron JMP 9600 HD.

General
BrandExtron
ModelJMP 9600 HD | 60-1135-01
Productmedia player
LanguageEnglish
FiletypeUser manual (PDF)
Storage
Built-in storage mediaNo
Storage media typeNot available
Total storage capacity0 GB
Features
Video formats supported-
Image formats supported-
Supported radio bandsNot supported
Product colorBlack
Video
Full HDYes
Maximum video resolution2048 x 1080 pixels
HD typeFull HD
Audio
Audio output channels- channels
Impedance75 Ω
Ports & interfaces
HDMI ports quantity0
HDCP-
Ethernet LAN (RJ-45) ports2
USB 2.0 ports quantity0
Audio (L/R) out0
Component video (YPbPr/YCbCr) out0
Composite video out0
DVI-I ports quantity2
Digital audio optical out0
Digital audio coaxial out0
S/PDIF out portYes
S-Video outputs quantity1
Network
Ethernet LANYes
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
Display
Built-in displayYes
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)70 W
Operational conditions
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight & dimensions
Width432 mm
Depth394 mm
Height89 mm
Weight10400 g
Packaging data
Package width525 mm
Package depth648 mm
Package height225 mm
Package weight14290 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron JMP 9600 HD below.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the weight of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a weight of 10400 g.

What is the height of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a height of 89 mm.

What is the width of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a width of 432 mm.

What is the depth of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a depth of 394 mm.

Is the manual of the Extron JMP 9600 HD available in English?

Yes, the manual of the Extron JMP 9600 HD is available in English .

Is your question not listed? Ask your question here

No results