Extron JMP 9600 HD manual

Extron JMP 9600 HD
9.2 · 1
PDF manual
 · 122 pages
English
manualExtron JMP 9600 HD

Set carriage return-line feed

Unless commanded otherwise, Telnet transmits a line feed character only (no carriage
return) to the connected player when you press the <Enter> key. This is the correct
setting for MSVPP communication with the player. The Telnet set crlf command
forces Telnet to transmit carriage return and line feed characters when <Enter> is
pressed, but if crlf is set, the MSVPP link with the player does not function properly.

Close

To close the link to the player, access the Telnet prompt by typing the Escape character
(<Ctrl>+<]>). At the Telnet prompt, type close, and then press <Enter>.
Help
For Telnet command definitions, at the Telnet prompt, type ? and then press <Enter>.
Quit
Exit the Telnet utility by typing quit and then pressing <Enter> at the Telnet prompt. If
you are connected to the media player, access the Telnet prompt by typing the Escape
character (<Ctrl>+<]>).

Subnetting — A Primer

It is not the purpose of this manual to describe TCP/IP protocol in detail. However, some
understanding of TCP/IP subnetting (a netmask defines a subset of a network — a set
of IP devices that have portions of their IP addresses in common) is necessary in order to
understand the interaction of the media player and the mail server gateway. To understand
subnetting at the level required to install and operate the media player, you must understand
the concepts of a gateway, local and remote devices, IP addresses and octets, and netmask
masks and octets.

Gateways

The media player can communicate with directly with other devices (if they are on the same
subnet [netmask]) or the communication can be routed via a gateway (a device that provides
a link between different subnets).

Local and Remote Devices

The local and remote devices are defined from the point of view of the function being
described. The media player is the local device and the other unit is the remote device.

IP Addresses and Octets

Valid IP addresses consist of four 1-, 2-, or 3-digit numeric subelds, properly called octets,
separated by dots (periods) (figure 85). Each octet can be numbered from 000 through 255.
Leading zeroes, up to three digits total per octet, are optional. Values of 256 and above are
invalid.
192.168.254.254Typical IP Address:
Octets
Figure 85. Typical IP Address
JMP 9600 Media Player • Ethernet Connection 109

Manual

View the manual for the Extron JMP 9600 HD here, for free. This manual comes under the category media players and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron JMP 9600 HD or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron JMP 9600 HD specifications

Below you will find the product specifications and the manual specifications of the Extron JMP 9600 HD.

General
BrandExtron
ModelJMP 9600 HD | 60-1135-01
Productmedia player
LanguageEnglish
FiletypeUser manual (PDF)
Storage
Built-in storage mediaNo
Storage media typeNot available
Total storage capacity0 GB
Features
Video formats supported-
Image formats supported-
Supported radio bandsNot supported
Product colorBlack
Video
Full HDYes
Maximum video resolution2048 x 1080 pixels
HD typeFull HD
Audio
Audio output channels- channels
Impedance75 Ω
Ports & interfaces
HDMI ports quantity0
HDCP-
Ethernet LAN (RJ-45) ports2
USB 2.0 ports quantity0
Audio (L/R) out0
Component video (YPbPr/YCbCr) out0
Composite video out0
DVI-I ports quantity2
Digital audio optical out0
Digital audio coaxial out0
S/PDIF out portYes
S-Video outputs quantity1
Network
Ethernet LANYes
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
Display
Built-in displayYes
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)70 W
Operational conditions
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight & dimensions
Width432 mm
Depth394 mm
Height89 mm
Weight10400 g
Packaging data
Package width525 mm
Package depth648 mm
Package height225 mm
Package weight14290 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron JMP 9600 HD below.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the weight of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a weight of 10400 g.

What is the height of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a height of 89 mm.

What is the width of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a width of 432 mm.

What is the depth of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a depth of 394 mm.

Is the manual of the Extron JMP 9600 HD available in English?

Yes, the manual of the Extron JMP 9600 HD is available in English .

Is your question not listed? Ask your question here

No results