Extron JMP 9600 HD manual

Extron JMP 9600 HD
9.2 · 1
PDF manual
 · 122 pages
English
manualExtron JMP 9600 HD

Relay Contacts

The relay outputs consist of four sets of NO and NC relay contacts. Connect an external

device that you want to be able to switch on or off to the player via three poles (normally

closed [NC], common [C], and normally open [NO]) of the 3.5 mm 4-pole captive screw

connectors.

NOTE: Relays R1 and R4 each span three poles on a single

NC CNO NC
R1
NCNC CCC NONONO
R3 R4R2

4-pole captive screw connector. Relays R2 and R3

each span two captive screw connectors.

These relay outputs act as switches to control external devices. Their activity is controlled via

MSVPP commands only (see “Applicable MSVPP commands“, below).

Applicable MSVPP Commands

The table below lists the MSVPP commands that you may need to control the inputs

and relays ports. These control functions are available only via MSVPP commands. The

commands sent to each player are the same, whether the show control computer is

connected to Remote port 1 or either LAN port.

NOTE: Click the blue links below to see the full command description in the

“Programming Guide“ section, including the complete command syntax,

variables, responses, and some examples.

Command Function

Digital inputs commands
GetInput <port#>
View the status of one or more inputs.
Poll multiple inputs by separating them with spaces in the command.
If no input is specified, the media player returns the level on all inputs.
SetInputTrigger On
Set the Digital Inputs ports to automatically report a status change such as a
switch closure.
NOTE: If the input trigger is on, the media player sends an input state message to the connected computer
whenever the state of an input changes. The message is similar to the response to the GetInput
message and contains the current state of all inputs. It is up to the show control system to determine
which input or inputs changed and act accordingly.
SetInputTrigger Off
Set the Digital Inputs ports to stop reporting status changes.
Digital outputs commands
Setoutput <port> <+ or >
Set multiple output levels by separating them with spaces ( + = on, – =off).
GetOutput <port>
View the status of one or more outputs/
Poll multiple outputs by separating them with spaces in the command.
If no output is specified, the media player returns the level on all outputs.
JMP 9600 Media Player • Detailed System Interaction 95

Manual

View the manual for the Extron JMP 9600 HD here, for free. This manual comes under the category media players and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron JMP 9600 HD or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron JMP 9600 HD specifications

Below you will find the product specifications and the manual specifications of the Extron JMP 9600 HD.

General
BrandExtron
ModelJMP 9600 HD | 60-1135-01
Productmedia player
LanguageEnglish
FiletypeUser manual (PDF)
Storage
Built-in storage mediaNo
Storage media typeNot available
Total storage capacity0 GB
Features
Video formats supported-
Image formats supported-
Supported radio bandsNot supported
Product colorBlack
Video
Full HDYes
Maximum video resolution2048 x 1080 pixels
HD typeFull HD
Audio
Audio output channels- channels
Impedance75 Ω
Ports & interfaces
HDMI ports quantity0
HDCP-
Ethernet LAN (RJ-45) ports2
USB 2.0 ports quantity0
Audio (L/R) out0
Component video (YPbPr/YCbCr) out0
Composite video out0
DVI-I ports quantity2
Digital audio optical out0
Digital audio coaxial out0
S/PDIF out portYes
S-Video outputs quantity1
Network
Ethernet LANYes
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
Display
Built-in displayYes
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)70 W
Operational conditions
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight & dimensions
Width432 mm
Depth394 mm
Height89 mm
Weight10400 g
Packaging data
Package width525 mm
Package depth648 mm
Package height225 mm
Package weight14290 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron JMP 9600 HD below.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the weight of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a weight of 10400 g.

What is the height of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a height of 89 mm.

What is the width of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a width of 432 mm.

What is the depth of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a depth of 394 mm.

Is the manual of the Extron JMP 9600 HD available in English?

Yes, the manual of the Extron JMP 9600 HD is available in English .

Is your question not listed? Ask your question here

No results