Extron JMP 9600 HD manual

Extron JMP 9600 HD
9.2 · 1
PDF manual
 · 122 pages
English
manualExtron JMP 9600 HD

Optically-isolated Digital Inputs

The digital input connections are implemented as four + and – terminals on 3.5 mm captive

screw terminal blocks. Because each input is optically-isolated, both connections must be

used to ensure the correct operation of the input circuit.

NOTE: By factory default, status notication for Digital Inputs 1 through 4 is disabled.

To be made operational, they must be enabled using the Set input trigger
on MSVPP command (see “Applicable MSVPP Commands”).

The optically-isolated input circuits provide for various connection scenarios; two common

methods follow:

Option 1 — Figure 76 shows a typical Digital Input application, monitoring external switch

positions. This application uses the Power port on the media player and is an application

where the current required is within the 1.8 A that the Power port makes available for

external use.

JMP 9600
Digital Inputs
JMP 9600
Power
JMP 9600
Input Terminals
Screw Terminals
1 kohm
Internal Configuration
+12V
Switch 1
Switch 2
GND
1
2

Figure 76. Digital Input Connection Using the Power Port

Option 2 — Figure 77 shows a similar external switch monitoring application, except that it

uses an external power supply. The external power supply is the preferred method in noisy

environments or when wiring is run over a long distance. The exact external power supply

voltage rating is not critical so long as the current through the 1-kohm resistor internal to

the media player is limited between 5 mA and 20 mA. Note the resistor in the input 1 circuit

in figure 77, which attenuates the current to within these limits.

JMP 9600
Digital Inputs
NOT
USED
680 Ohm
+24 VDC PS
+VE
-VE
Switch 1
JMP 9600
Input Terminals
Screw Terminal
Use twisted pair
wire for noise
cancellation.
1 kohm
Internal Configuration
+12V
GND
1
2
+5 VDC PS
+VE
-VE
Switch 2
+5VDC
JMP 9600
Power

Figure 77. Digital Input Connection Using External Power Supplies

JMP 9600 Media Player • Detailed System Interaction 94

Manual

View the manual for the Extron JMP 9600 HD here, for free. This manual comes under the category media players and has been rated by 1 people with an average of a 9.2. This manual is available in the following languages: English. Do you have a question about the Extron JMP 9600 HD or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron JMP 9600 HD specifications

Below you will find the product specifications and the manual specifications of the Extron JMP 9600 HD.

General
BrandExtron
ModelJMP 9600 HD | 60-1135-01
Productmedia player
LanguageEnglish
FiletypeUser manual (PDF)
Storage
Built-in storage mediaNo
Storage media typeNot available
Total storage capacity0 GB
Features
Video formats supported-
Image formats supported-
Supported radio bandsNot supported
Product colorBlack
Video
Full HDYes
Maximum video resolution2048 x 1080 pixels
HD typeFull HD
Audio
Audio output channels- channels
Impedance75 Ω
Ports & interfaces
HDMI ports quantity0
HDCP-
Ethernet LAN (RJ-45) ports2
USB 2.0 ports quantity0
Audio (L/R) out0
Component video (YPbPr/YCbCr) out0
Composite video out0
DVI-I ports quantity2
Digital audio optical out0
Digital audio coaxial out0
S/PDIF out portYes
S-Video outputs quantity1
Network
Ethernet LANYes
Ethernet LAN data rates10,100,1000 Mbit/s
Wi-FiNo
Display
Built-in displayYes
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)70 W
Operational conditions
Operating temperature (T-T)10 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight & dimensions
Width432 mm
Depth394 mm
Height89 mm
Weight10400 g
Packaging data
Package width525 mm
Package depth648 mm
Package height225 mm
Package weight14290 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron JMP 9600 HD below.

What is bluetooth?

Bluetooth is a way of exchanging data wirelessly between electronic devices via radio waves. The distance between the two devices that exchange data can in most cases be no more than ten metres.

Can bluetooth devices of different brands be connected to each other?

Yes, bluetooth is a universal method that allows different devices equipped with bluetooth to connect to each other.

What is the weight of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a weight of 10400 g.

What is the height of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a height of 89 mm.

What is the width of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a width of 432 mm.

What is the depth of the Extron JMP 9600 HD?

The Extron JMP 9600 HD has a depth of 394 mm.

Is the manual of the Extron JMP 9600 HD available in English?

Yes, the manual of the Extron JMP 9600 HD is available in English .

Is your question not listed? Ask your question here

No results