Extron FOX Tx AV MM manual

Extron FOX Tx AV MM
8.4 · 1
PDF manual
 · 34 pages
English
manualExtron FOX Tx AV MM

RS-232 Control of Tx and Rx Units

When the FOX Tx/Rx AV is configured by RS-232 commands, some commands are processed
by the transmitter and others are processed by the receiver. The SIS commands do not
distinguish between the two units. The system routes the commands based on where they are
processed.
A system block diagram showing which functions are processed by the transmitter and which
are processed by the receiver is shown below:
Transmitter Receiver
Fiber Link 1
Fiber Link 2
(optional)
Pr
ocess
Input conguration
Audio gain
Process
Color
Tint
Brightness
Contrast
Video mute
Output conguration
Daisy chain/
loop out mode
Audio mute
Audio output level

Figure 10. System Block Diagram

For full functionality, both fiber optic links must be enabled. If only link 1 is enabled, the ability to
configure the system through SIS commands is limited by the lack of return communication from
the receiver to the transmitter:
All configuration carried out using the transmitter is processed normally because only fiber link 1
is required.
Queries from the transmitter about the status of receiver settings are not processed correctly
because fiber link 2 is required to carry the return signal.
The receiver cannot be used to configure the transmitter because fiber link 2 is required.
The lack of communication between the transmitter and the receiver can result in mismatches in
the value settings of the two units, which may cause confusion with control systems or software
applications. To avoid this, within four seconds of link 2 becoming active, the receiver settings are
automatically copied to the transmitter to ensure settings for both units match.
NOTE: When the receiver settings are copied to the transmitter, existing transmitter settings
are overwritten and it may be necessary to update those values.
FOX Tx/Rx AV • Configuration 13

Manual

View the manual for the Extron FOX Tx AV MM here, for free. This manual comes under the category AV extenders and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron FOX Tx AV MM or do you need help? Ask your question here

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron FOX Tx AV MM specifications

Below you will find the product specifications and the manual specifications of the Extron FOX Tx AV MM.

General
BrandExtron
ModelFOX Tx AV MM | 60-941-11
ProductAV extender
LanguageEnglish
FiletypeUser manual (PDF)
Features
TypeAV transmitter
Maximum resolution- pixels
Product colorGray
Bandwidth2.125 Gbit/s
Ports & interfaces
Connectivity technologyWired
S-Video inputs quantity1
BNC input ports3
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width109 mm
Depth152 mm
Height43 mm
Weight700 g
Packaging data
Package weight3000 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron FOX Tx AV MM below.

What is the weight of the Extron FOX Tx AV MM?

The Extron FOX Tx AV MM has a weight of 700 g.

What is the height of the Extron FOX Tx AV MM?

The Extron FOX Tx AV MM has a height of 43 mm.

What is the width of the Extron FOX Tx AV MM?

The Extron FOX Tx AV MM has a width of 109 mm.

What is the depth of the Extron FOX Tx AV MM?

The Extron FOX Tx AV MM has a depth of 152 mm.

Is the manual of the Extron FOX Tx AV MM available in English?

Yes, the manual of the Extron FOX Tx AV MM is available in English .

Is your question not listed? Ask your question here

No results