Extron DVS 510 manual

Extron DVS 510
8.7 · 1
PDF manual
 · 128 pages
English
manualExtron DVS 510
DVS 510 Series • Remote Configuration and Control 49

IP Address

To access the DVS 510 or DVS 510 SA via the Ethernet port, obtain the IP address of the
scaler from your network administrator. If the IP address has been changed to an address
comprised of words and characters, you can determine the actual numeric IP address using
the ping (ICMP) utility (see IP Addressing on page 114 for more details). If the IP address
has not been changed, the factory-specified default is 192.168.254.254.

Establishing an Ethernet Connection Using TCP

Establish a network connection to a DVS as follows:
1. Open a TCP connection to port 23, using the IP address of the scaler.
The scaler responds with a copyright message that includes the date, the name
of the product, firmware version, part number, and the current date and time (see
Scaler-initiated Messages on the next page).
NOTE: If the scaler is not password-protected, the device is ready to accept SIS
commands immediately after it sends the copyright message.
If the scaler is password-protected, a password prompt appears below the
copyright message.
2. If the scaler is password protected, enter the appropriate administrator or user
password.
3. If the password is accepted, the scaler responds with Login User or Login
Administrator.
4. If the password is not accepted, the Password prompt reappears.

Connection Timeouts

The Ethernet link times out after a designated period of no communications. By default,
this timeout value is set to 5 minutes, but the value can be changed (see the Set current
connection port timeout command on page 74).
NOTE: Extron recommends leaving the default timeout at 5 minutes and periodically
issuing the Query (Q) command to keep the connection active. If there are long idle
periods, Extron recommends disconnecting and reopening the connection when
another command must be sent.

Using SIS Commands

SIS commands consist of one or more characters per command field. They do not require
any special characters to begin or end the command character sequence. When the DVS
determines that a command is valid, it executes the command and sends a response to the
host device. Each scaler response to an SIS command ends with a carriage return and a
line feed (CR/LF = ]), which signals the end of the response character string. A string is one
or more characters.

Manual

View the manual for the Extron DVS 510 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Extron DVS 510 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DVS 510 specifications

Below you will find the product specifications and the manual specifications of the Extron DVS 510.

General
BrandExtron
ModelDVS 510 | 60-835-01
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorGray
Scaled resolutions640 x 480,800 x 600,1024 x 768,1280 x 1024,1280 x 768,1280 x 800,1360 x 768,1366 x 768,1400 x 1050,1440 x 900,1600 x 1200,1680 x 1050,1920 x 1080,1920 x 1200
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (typical)28 W
Weight & dimensions
Width444 mm
Depth239 mm
Height89 mm
Weight3200 g
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Ports & interfaces
DVI-I ports quantity3
VGA (D-Sub) input ports4
RJ-45 ports quantity1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DVS 510 below.

What is the weight of the Extron DVS 510?

The Extron DVS 510 has a weight of 3200 g.

What is the height of the Extron DVS 510?

The Extron DVS 510 has a height of 89 mm.

What is the width of the Extron DVS 510?

The Extron DVS 510 has a width of 444 mm.

What is the depth of the Extron DVS 510?

The Extron DVS 510 has a depth of 239 mm.

Is the manual of the Extron DVS 510 available in English?

Yes, the manual of the Extron DVS 510 is available in English .

Is your question not listed? Ask your question here

No results