Extron DVS 510 manual

Extron DVS 510
8.7 · 1
PDF manual
 · 128 pages
English
manualExtron DVS 510
DVS 510 Series • Operation 17

Powering On

Apply power to the DVS by connecting the provided IEC power cord from the rear panel
power connector to an AC power source. The scaler performs a self-test during which all
the front panel buttons blink red, then green, then amber. At the same time, the initial two
power-up screens are displayed on the LCD screen. At the completion of the self-test, all
button lights turn off except for the previously selected Input button (Input 1 by default) and
the MENU and NEXT buttons, all of which continue to be lit amber. If picture-in-picture (PIP)
mode was enabled previously, the input button for the PIP source and the PIP On/Off
button light green. The LCD panel displays the default cycle.
If an error occurs during the self-test, the DVS locks up and does not operate. If this occurs,
call the Extron S3 Sales & Technical Support Hotline (see the rear cover for contact
information in your area).
When power is first applied to the DVS, the LCD panel displays Initializing Please Wait...,
then Extron, DVS 510 Vn.nn, where n.nn is the current firmware version. If the DVS
self-test completes successfully, the default cycle begins, in which the LCD panel display
alternates between the current output resolution and refresh rates, and the currently
selected input number, signal type, and horizontal and vertical frequencies. These two
screens continue to cycle on the screen when the menu system is not in use.
The flow diagram below shows the order in which the screens appear at power-up and in
the default cycle.
Default Cycle
2 sec.
Power
On
Extron
DVS 510 V1.00
Initializing
Please Wait...
In # 5 RGB
47.8KhZ 60.0Hz
Output Rate
1080i @ 60Hz
5 sec.
5 sec.
Figure 13. Power-up and Default Cycle
NOTE: Audio and video mute settings are not retained when power is cycled to the
DVS.

Manual

View the manual for the Extron DVS 510 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Extron DVS 510 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DVS 510 specifications

Below you will find the product specifications and the manual specifications of the Extron DVS 510.

General
BrandExtron
ModelDVS 510 | 60-835-01
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorGray
Scaled resolutions640 x 480,800 x 600,1024 x 768,1280 x 1024,1280 x 768,1280 x 800,1360 x 768,1366 x 768,1400 x 1050,1440 x 900,1600 x 1200,1680 x 1050,1920 x 1080,1920 x 1200
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (typical)28 W
Weight & dimensions
Width444 mm
Depth239 mm
Height89 mm
Weight3200 g
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Ports & interfaces
DVI-I ports quantity3
VGA (D-Sub) input ports4
RJ-45 ports quantity1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DVS 510 below.

What is the weight of the Extron DVS 510?

The Extron DVS 510 has a weight of 3200 g.

What is the height of the Extron DVS 510?

The Extron DVS 510 has a height of 89 mm.

What is the width of the Extron DVS 510?

The Extron DVS 510 has a width of 444 mm.

What is the depth of the Extron DVS 510?

The Extron DVS 510 has a depth of 239 mm.

Is the manual of the Extron DVS 510 available in English?

Yes, the manual of the Extron DVS 510 is available in English .

Is your question not listed? Ask your question here

No results