Extron DVS 510 manual

Extron DVS 510
8.7 · 1
PDF manual
 · 128 pages
English
manualExtron DVS 510
DVS 510 Series • Reference Information 118

Local echo

Once your computer is connected to the DVS 510, by default Telnet does not display
your keystrokes on the screen. SIS commands are entered blindly, and only the SIS
responses are displayed on the screen. To command Telnet to show all keystrokes, enter
set local_echo at the Telnet prompt before you open the connection to the scaler.
With local echo turned on, keystrokes and the scaler responses are displayed on the same
line.
Example: 1*1!In1 Out1 All,
where 1*1! is the SIS command and In1 Out1 All is the response.
Note that all keystrokes are displayed, even those that should be masked, such as the
password entry. For example, when entering a password with local echo turned on, you see
a display such as a*d*m*i*n*, where admin is the keyed-in password and ***** is the
masked response.
Local echo can be turned off by entering unset local_echo at the Telnet prompt. If your
computer is connected to the DVS, and you need to access the Telnet prompt to turn
local echo off, enter the Escape sequence (<Ctrl + ] >).

Setting carriage return with line feed

Unless commanded otherwise, Telnet transmits a line feed character only (no carriage
return) to the connected scaler when you press the <Enter> key. This is the correct setting
for SIS communication with the scaler. The Telnet set crlf command forces Telnet to
transmit carriage return and line feed characters when <Enter> is pressed. However, if
crlf is set, the SIS link with the scaler does not function properly.

Closing the link to the scaler

To close the link to the scaler, access the Telnet prompt by entering the Escape sequence
(<Ctrl + ]>). At the Telnet prompt, enter close.
Help
For Telnet command definitions, enter ? at the Telnet prompt.

Exiting Telnet (Quit command)

Exit the Telnet utility by entering quit at the Telnet prompt. If you are connected to the
DVS, access the Telnet prompt by entering the Escape sequence (<Ctrl + ]>).

Subnetting, a Primer

A subnet is a subset of a network — a set of IP devices that have portions of their IP
addresses in common. It is not the purpose of this manual to describe TCP/IP protocol
in detail. However, some understanding of TCP/IP subnetting is necessary in order to
understand the interaction of the DVS 510 and the mail server gateway. To understand
subnetting at the level required to install and operate the DVS 510, you must understand
the concepts of a gateway, local and remote devices, IP addresses and octets, and subnet
masks and octets.

Gateways

The DVS 510 Series can communicate with the e-mail server that it uses for e-mail
notification directly (if they are on the same subnet), or its communication can be routed via
a gateway (a computer that provides a link between different subnets).

Manual

View the manual for the Extron DVS 510 here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.7. This manual is available in the following languages: English. Do you have a question about the Extron DVS 510 or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DVS 510 specifications

Below you will find the product specifications and the manual specifications of the Extron DVS 510.

General
BrandExtron
ModelDVS 510 | 60-835-01
Productnot categorized
LanguageEnglish
FiletypeUser manual (PDF)
Features
Product colorGray
Scaled resolutions640 x 480,800 x 600,1024 x 768,1280 x 1024,1280 x 768,1280 x 800,1360 x 768,1366 x 768,1400 x 1050,1440 x 900,1600 x 1200,1680 x 1050,1920 x 1080,1920 x 1200
Power
AC adapter input voltage100-240 V
AC adapter frequency50/60 Hz
Power consumption (typical)28 W
Weight & dimensions
Width444 mm
Depth239 mm
Height89 mm
Weight3200 g
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Ports & interfaces
DVI-I ports quantity3
VGA (D-Sub) input ports4
RJ-45 ports quantity1
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DVS 510 below.

What is the weight of the Extron DVS 510?

The Extron DVS 510 has a weight of 3200 g.

What is the height of the Extron DVS 510?

The Extron DVS 510 has a height of 89 mm.

What is the width of the Extron DVS 510?

The Extron DVS 510 has a width of 444 mm.

What is the depth of the Extron DVS 510?

The Extron DVS 510 has a depth of 239 mm.

Is the manual of the Extron DVS 510 available in English?

Yes, the manual of the Extron DVS 510 is available in English .

Is your question not listed? Ask your question here

No results