Extron DMP 128 Plus C manual

Extron DMP 128 Plus C
8.4 · 1
PDF manual
 · 188 pages
English
manualExtron DMP 128 Plus C
DMP 128 Plus • Configuration Tools 69

Groups

Groups allow master control of Gain, Mute, Bass, Treble, and Loudness for groups of
channels. Groups are used in macros, ACP panels, and other control configurations.
Click Tools > Configure Groups to open the Configure Groups dialog box.
1
Select Group
5
Apply Button
2
Select Control Type
6
Delete Current Group Button
3
Available Group Members
7
Close Button
4
Change Name Button
Figure 126. Group Controls Dialog Box
1
Select Group — Provides a drop-down menu to select the number of the group to
be configured. If the group has been configured and named, the group name appears
next to the group number. If the group slot is empty, it reads <empty> next to the group
number. There are 64 group slots available.
2
Select Control Type — Group controls can manage Gain, Mute, Bass, or Treble for
the specified inputs, mix-points, or outputs. From the Select Control Type panel,
select the type of control from the Gain, Mute, Bass, or Treble lists.
NOTE: Bass and Treble are only available if the Bass and Treble filters are inserted
on a channel and only allow channels with the filters to be placed in a group.
3
Available Group Members — This section populates according to the selected
control type and lists all inputs, mix-points, and outputs available to be added as group
members. Check the box next to a member to add it to the group. Group members
must be the same control type. The maximum number of group members for a single
group is 128.
NOTE: Loudness processors can be selected from input and output gain stages.
4
Change Name Button — Once a group has been created, select it from the Select
Group drop-down menu (
1
), click Change Name to change the name of the selected
group.
5
Apply Button — Click Apply after changes to a group have been made. The Confirm
Group Details dialog box opens allowing the group name and number to be edited.
Click OK to apply group changes.
6
Delete Current Group Button — Select a group from the Select Group drop-down
menu and click Delete Current Group to delete the group.
7
Close Button — Click Close to close the dialog box. Any changes that have not been
applied will be lost.
figure 126. Group Controls Dialog Box

Manual

View the manual for the Extron DMP 128 Plus C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron DMP 128 Plus C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DMP 128 Plus C specifications

Below you will find the product specifications and the manual specifications of the Extron DMP 128 Plus C.

General
BrandExtron
ModelDMP 128 Plus C | 60-1512-01
Productnot categorized
EAN5711783372820
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
Number of inputs12 inputs
Features
Total Harmonic Distortion plus Noise (THD+N)0.01 %
Frequency range20 - 20000 Hz
Signal-to-Noise Ratio (SNR)115 dB
Input impedance10000 Ω
Housing colorGray
Housing materialMetal
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)29.4 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth241 mm
Height43 mm
Weight2040 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DMP 128 Plus C below.

What is the weight of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a weight of 2040 g.

What is the height of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a height of 43 mm.

What is the width of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a width of 442 mm.

What is the depth of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a depth of 241 mm.

Is the manual of the Extron DMP 128 Plus C available in English?

Yes, the manual of the Extron DMP 128 Plus C is available in English .

Is your question not listed? Ask your question here

No results