Extron DMP 128 Plus C manual

Extron DMP 128 Plus C
8.4 · 1
PDF manual
 · 188 pages
English
manualExtron DMP 128 Plus C
DMP 128 Plus • DSP Configurator Software 18

Live and Emulate Panel

The Live and Emulate buttons allow users to switch between Live and Emulate mode and
displays transmit activity (Tx) and receive activity (Rx) when in Live mode.
Figure 26. Mode Panel

Emulate Mode

While in Emulate mode, DSP Configurator is functioning in an “offline” state. Changes made
to the configuration file are not applied to a DMP 128 Plus.
In Emulate mode, the user can create and configure the software as though a device was
connected, except for any actions that require direct connection to the device or information
that is stored only on the device. Once configuration is complete, the user can switch to
Live mode and apply the configuration to the device or save the configuration file to be
loaded onto one or multiple devices at a later time.
Creating configuration files in Emulate mode saves time by not requiring a device to be
connected or present in order for the bulk of DSP configuration to be completed.
NOTE: Not all menu options or actions are available in Emulate mode.

Live Mode

Enter Live mode to connect to a DMP 128 Plus and push or pull configurations between the
device and host PC. In Live mode, changes made in DSP Configurator are directly applied
to the DMP 128 Plus. Additionally, presets and macros can be created and stored on the
device.
When entering Live mode, the user is prompted with the Connect to device dialog box.

Connect to a DMP 128 Plus in Live Mode

1. Click the Live button in the menu bar of DSP Configurator (see figure 27,
1
).
Alternatively, select Tools > Connect to Device or press <F6> on the keyboard. The
Connect to device dialog box opens.
Figure 27. Live Button
2. Connect to the DMP 128 Plus.
a. To connect via TCP/IP (recommended):
Click the TCP/IP tab in the dialog box. Enter the IP address of the device in the
Hostname or IP Address field. If necessary, enter the device password in the
Password field (see figure 28
a
on the next page).
b. To connect via USB:
Click the USB tab in the dialog box. Select the device from the USB Devices
drop-down menu (see figure 28
b
on the next page).
c. To connect via RS-232:
Click the RS-232 tab in the dialog box. Select the com port the device is connected
to on the host PC from the Com Port drop-down (see figure 28
c
on the
next page).
figure 26. Mode Panel
figure 27. Live Button

Manual

View the manual for the Extron DMP 128 Plus C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron DMP 128 Plus C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DMP 128 Plus C specifications

Below you will find the product specifications and the manual specifications of the Extron DMP 128 Plus C.

General
BrandExtron
ModelDMP 128 Plus C | 60-1512-01
Productnot categorized
EAN5711783372820
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
Number of inputs12 inputs
Features
Total Harmonic Distortion plus Noise (THD+N)0.01 %
Frequency range20 - 20000 Hz
Signal-to-Noise Ratio (SNR)115 dB
Input impedance10000 Ω
Housing colorGray
Housing materialMetal
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)29.4 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth241 mm
Height43 mm
Weight2040 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DMP 128 Plus C below.

What is the weight of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a weight of 2040 g.

What is the height of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a height of 43 mm.

What is the width of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a width of 442 mm.

What is the depth of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a depth of 241 mm.

Is the manual of the Extron DMP 128 Plus C available in English?

Yes, the manual of the Extron DMP 128 Plus C is available in English .

Is your question not listed? Ask your question here

No results