Extron DMP 128 Plus C manual

Extron DMP 128 Plus C
8.4 · 1
PDF manual
 · 188 pages
English
manualExtron DMP 128 Plus C
DMP 128 Plus • Dante Controller 115
To rename a DMP 128 Plus AT transmitter:
1. Select Device View from the Device menu on the Network View screen or press
<Ctrl+D> on the keyboard. The Device View dialog box opens.
2. From the (Select a Dante Device...) drop-down menu, select the name of the
DMP 128 Plus AT (see figure 185,
1
below).
3. On the Device View screen, select the Transmit tab (
2
).
4. Click in the ChannelLabel column to the right of the name of the transmitter being
renamed. A text box and cursor appear (
3
).
5. Enter a new name (up to 31 characters) using any combination of letters, numbers, and
special characters except for @, =, and . (period).
6. Press <Enter> on the keyboard to confirm the name, or click another label text box.
7. Repeat steps 4 through 6 to rename additional transmitter channels.
8. When finished renaming transmitters, close the Device View dialog box.
Figure 185. Device View Screen — Renaming a Transmitter

Finding a Dante Device IP Address

To find the IP address of a Dante device, the name of the device is needed (see Renaming
the DMP 128 Plus AT in Dante Controller on page111).
NOTE: If the DMP 128 Plus AT has not been renamed, its default name consists of the
product name followed by a hyphen, plus the last 6 digits of the device MAC address
(for example, DMP128P-0ee8ee).
1. Open Dante Controller.
2. On the Dante Controller-Network View screen, click the Device Info tab (see
figure 186,
1
below).
3. On the Device Info page, locate the name of the DMP 128 Plus AT in the
Device Name column (
2
). The IP address is located in the Primary Address
column(
3
). In the example below, the IP address for the connected DMP 128 Plus AT
is 192.168.11.120.
Figure 186. Device Info Page
figure 185 Device View Screen — Renaming a Transmitter
figure 186 Device Info Page

Manual

View the manual for the Extron DMP 128 Plus C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron DMP 128 Plus C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DMP 128 Plus C specifications

Below you will find the product specifications and the manual specifications of the Extron DMP 128 Plus C.

General
BrandExtron
ModelDMP 128 Plus C | 60-1512-01
Productnot categorized
EAN5711783372820
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
Number of inputs12 inputs
Features
Total Harmonic Distortion plus Noise (THD+N)0.01 %
Frequency range20 - 20000 Hz
Signal-to-Noise Ratio (SNR)115 dB
Input impedance10000 Ω
Housing colorGray
Housing materialMetal
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)29.4 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth241 mm
Height43 mm
Weight2040 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DMP 128 Plus C below.

What is the weight of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a weight of 2040 g.

What is the height of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a height of 43 mm.

What is the width of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a width of 442 mm.

What is the depth of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a depth of 241 mm.

Is the manual of the Extron DMP 128 Plus C available in English?

Yes, the manual of the Extron DMP 128 Plus C is available in English .

Is your question not listed? Ask your question here

No results