Extron DMP 128 Plus C manual

Extron DMP 128 Plus C
8.4 · 1
PDF manual
 · 188 pages
English
manualExtron DMP 128 Plus C
DMP 128 Plus • Dante Controller 107

Dante Controller

This section describes the DMP 128 Plus AT network installation, configuration, and control
using Dante Controller for Windows and covers the following topics:
Overview
Downloading and Installing Dante Controller
Configuring the DMP 128 Plus AT in Dante Controller
Physical Dante Network Setup
Dante Controller Operation
Dante Routing Operation
Dante Troubleshooting

Overview

DMP 128 Plus AT devices (DMP 128 Plus AT, C AT, and C V AT) use Dante technology
by Audinate to provide high performance digital audio networking over standard TCP/IP
networks. The Dante Controller software application is used to route audio on the network.
Dante allows audio channels to be transported across a switched Ethernet data network
while meeting the quality requirements of professional audio.
Up to 24 channels can be transmitted from the DMP 128 Plus AT to the Dante network and
up to 48 channels can be received by the DMP 128 Plus AT from the Dante network. AT
inputs 33 through 48 can be used to facilitate EXP bus communication (see Connecting a
DMP 128 Plus AT Device and an EXP-enabled non-AT Device on page95).
Audio signals are converted by DMP 128 Plus AT devices, processed and routed to the
AT bus, and transmitted onto the Dante network. Audinate recommends the Dante audio
network be kept separate from other networks. However, the audio network can be shared
with control traffic or unrelated data traffic. Audio channels can be unicast or multicast to
make the best use of available bandwidth.

Manual

View the manual for the Extron DMP 128 Plus C here, for free. This manual comes under the category not categorized and has been rated by 1 people with an average of a 8.4. This manual is available in the following languages: English. Do you have a question about the Extron DMP 128 Plus C or do you need help? Ask your question here

Index

Need help?

Do you have a question about the Extron and is the answer not in the manual?

  • Receive updates on solutions
  • Get answers to your question

Question and answer

Number of questions: 0

Extron DMP 128 Plus C specifications

Below you will find the product specifications and the manual specifications of the Extron DMP 128 Plus C.

General
BrandExtron
ModelDMP 128 Plus C | 60-1512-01
Productnot categorized
EAN5711783372820
LanguageEnglish
FiletypeUser manual (PDF)
Ports & interfaces
Number of inputs12 inputs
Features
Total Harmonic Distortion plus Noise (THD+N)0.01 %
Frequency range20 - 20000 Hz
Signal-to-Noise Ratio (SNR)115 dB
Input impedance10000 Ω
Housing colorGray
Housing materialMetal
Power
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (typical)29.4 W
Operational conditions
Operating temperature (T-T)0 - 50 °C
Storage temperature (T-T)-40 - 70 °C
Operating relative humidity (H-H)10 - 90 %
Storage relative humidity (H-H)10 - 90 %
Weight & dimensions
Width442 mm
Depth241 mm
Height43 mm
Weight2040 g
show more

Frequently Asked Questions

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Extron DMP 128 Plus C below.

What is the weight of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a weight of 2040 g.

What is the height of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a height of 43 mm.

What is the width of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a width of 442 mm.

What is the depth of the Extron DMP 128 Plus C?

The Extron DMP 128 Plus C has a depth of 241 mm.

Is the manual of the Extron DMP 128 Plus C available in English?

Yes, the manual of the Extron DMP 128 Plus C is available in English .

Is your question not listed? Ask your question here

No results